Tradeindia.com - Buy leads in Fabricators

[Buy] Titaniaum Wire Mesh

Wed, 23 May 2012 14:06:00 +0530

We have an requirement of titanium wire mesh 25mm x 25mm, x 2.5mm wire dia.
Quantity 4 square meter. Kindly let us know your quote at the earliest.

The above is a trial order, once things goes on we shall order for good quantities.

Kindly request you to do the needful at the earliest.

[Buy] PEB Low Cost Warehousing

Tue, 17 Apr 2012 12:12:00 +0530

We require Simple and Low Cost Warehouse Structures - to be built with dimensions of 30x20x6m on a 20 Acre Site (approximately two thirds of the site area will be built on) in Lusaka, Zambia. The foundations etc will be done on site.

There is no insulation required on Walls/roof/ceiling. No seismic activity to note in the area and No adverse/severe weather conditions to note.

Please provide quotes for Roof sheets (IT4) and cladding separate and please provide FOB prices with expected lead time on manufacture and delivery periods.

[Buy] Agitator

Thu, 12 Apr 2012 11:54:00 +0530

We have requirement of agitator.
Please find below agitator datasheet.

GENERAL Tag Number 122-TZ-001 122-TZ-002 122-TZ-003 122-TZ-004 122-TZ-005
Service Antiscalnt tank Mixer Corrosion inhibitor tank Mixer Biocide tank Mixer Oxygen scavenger tank Mixer Polymer tank Mixer
Quantity Total Numbers 1 1 1 1 1
Type V(ertical) / H(orizontal) V V V V V
Entry T(op) / S(ide) T T T T T
Mounting Centre / Off-centre Off-centre Off-centre Off-centre Off-centre Off-centre
Installation O(utdoor) / I(ndoor) O O O O O
Duty C(ontinuous) / I(ntermittent) C C I C C
Area Classification Zone 2 Zone 2 Zone 2 Zone 2 Zone 2
FLUID Fluid Handled Antiscalant Solution Corrosion inhibitator Solution Biocide Solution Oxygen scavenger Solution Polymer solution
Concentration % 100 10 10 10 1
Fluid Temperature C Operating 13 - 31 13 - 31 13 - 31 13 - 31 13 - 31
Minimum 13 13 13 13 13
Maximum 31 31 31 31 31
Fluid Viscosity Cp At Operating Temp. 1 1 1 1 1
Fluid Specific Gravity 1.085 1.1 1.03 1 1
OPERATING CONDITIONS (PROCESS Tank Data Type Vertical Vertical Vertical Vertical Vertical
Dimension 1.0 m Dia X 1.2 m Ht 1.0 m Dia X 1.2 m Ht 1.2 m Dia X 1.6 m Ht 1.0 m Dia X 1.2 m Ht 1.8 m Dia X 2.0 m Ht
Capacity (Ltr) 900 900 1700 900 5000
Top Head Flat Flat Flat Flat Flat
Bottom Head Flat Flat Flat Flat Flat
Baffle (Yes / No) N N N N N
CONSTRUCTION Material of construction Shaft SS316 SS316 SS316 SS316 SS316
Propeller SS316 SS316 SS316 SS316 SS316
Shaft seal VENDOR TO CONFIRM VENDOR TO CONFIRM VENDOR TO CONFIRM VENDOR TO CONFIRM VENDOR TO CONFIRM
Agitator Type Propeller Propeller Propeller Propeller Propeller
Design Temperature, oC 65 65 65 65 65
OTHER Noise level at 1 m, dB(A) < 85 < 85 < 85 < 85
Ambient Temperature C Maximum 36 36 36 36 36
Minimum 16 16 16 16 16
1) Power supply - 400 VAC (+/-10%) / 3 Ph / 50 Hzs (+/-5%)

All motors shall be supplied as per Standard IEC 60034.

Motor rating:
400V,3P, 50 Hz

Area classification : Zone 2
Temperature rise : B
Degree of protection : Exd IIB T3 (ATEX II 2G) - IP 55 / Tropicalized
Insulation Class : F

Help us by providing your best techno-commercial offer latest by 9th April, 2012.

So kindly send offer for the same, prompt reply will be appreciated.

If you have required additional information please feel free to contact us.

[Buy] Steel Work Table

Wed, 11 Apr 2012 17:48:00 +0530

Interested in the following items:

1. SS Work Table 6ft x 2.5ft, 34" height.
2. Marble Work Table 4ft x 2.5ft, 34" height.
3. Sink with Work Table.

Contact us with best offer.

[Buy] Draft Chamber

Wed, 04 Apr 2012 15:07:00 +0530

We are looking for 'Draft Chamber'.

Description: We are having requirement for Draft Chamber, Kindly send us quotation.

Sourcing Place:Anywhere from India.

Your prompt reply would be highly appreciated.

[Buy] Workshop Building

Mon, 02 Apr 2012 13:05:00 +0530

We have urgent requirement for construction of workshop.

Please send details and best offer.

[Buy] Mast

Mon, 26 Mar 2012 12:02:00 +0530

We have the requirement of the mast for our various railway projects.

Please provide the contatc details and mail id.

[Buy] Duct

Wed, 21 Mar 2012 14:58:00 +0530

We have some duct requirement for that project.

Please give your detail and export procedure.

[Buy] Ss Bracket Fabrication

Tue, 13 Mar 2012 17:37:00 +0530

We are looking for 'Ms & Ss Bracket Fabrication'.

We need to place the order for MS and SS Bracket Fabricator.
Contact us with your best offer.

[Buy] Led Cabinet Fabrication

Mon, 12 Mar 2012 12:33:00 +0530

We are looking for a fabricator to manufacture Fe/Al cabinets for LED screens.

If interested please contact us.

[Buy] Structure

Sun, 04 Mar 2012 12:27:00 +0530

Please send us your terms and conditions for second house. its a 4000 sqft area.
We need you to tail us about your architectural, interior and exterior charges and fees.

Kindly getback to us asap.

[Buy] Ldpe Lay Flat

Thu, 01 Mar 2012 09:50:00 +0530

Looking to purchase LDPE lay flat in 50 or 100 M role in large quantity.

Kindly send quotation, prices and other related information asap.

[Buy] Duty Structure

Sat, 25 Feb 2012 17:58:00 +0530

We would like to import Product of Duty Structure of Ungalvanised Steel Wire Ropes.

So we have expecting the full Description of the Product and The Photo copy of the product to be attached.
Please send us needful information asap.

[Buy] Function Hall

Mon, 30 Jan 2012 12:49:00 +0530

We require 140ft x 140ft GI shed like kirby.

Please quote the same.

[Buy] Mechanical Fabricator

Fri, 20 Jan 2012 13:01:00 +0530

Requires a Mechanical Fabricator for my Design.

This is Hull for underwater vehicle.
750mm long and diameter of 100mm.

Contact us with details.

[Buy] Copper Item

Mon, 09 Jan 2012 20:44:00 +0530

Requires 16 sqmm,20 sqmm,25sqmm copper pipe.

Please send the best possible price.

[Buy] Fabricators

Sat, 07 Jan 2012 22:24:00 +0530

Please quote with best possible prices for the attached requirement.

9.16 Supply and laying of Aluminium Openable/closed Trunking with all necessary fittings, accessories like clams, supporting and fitting members as required,

9.16.1 50mm X 25mm 80mtr
9.16.2 100mm X 50mm 80mtr
9.18 Cable Trays

Supply & installation of aluminium painted MS perforated cable trays with necessary frame etc. for power cables as specified and as required.

9.18.1 600mm wide horizontal / vertical tier. R.Omtr

9.18.2 450mm wide horizontal / vertical tier. 150mtr

9.18.3 300 mm wide horizontal / vertical tier. 175mtr
9.18.4 200 mm wide horizontal / vertical tier. R.O mtrs

9.18.5 100 mm wide horizontal / vertical tier. 350mtrs

9.18.6 50 mm wide horizontal / vertical tier. 120mtrs

[Buy] Ms Fabrication

Thu, 29 Dec 2011 12:00:00 +0530

For our project we have requirement of fabrication of mould plat forms, racks, trolley, etc. Please find drawing details and quote .

The raw Material, paints, electricity will be provided by Suzlon.

Consumables like Welding electrode ,Emery paper, equipments and Tools & tackles will be in your scope.

Please quote your price on per KG Basis.

Please send your offer letter to us for further processing.

Please quote Labour Charges for the Under given Drawings.
1. Normal Height IBC Stand.
2. Prefab Cleaning Stand.
3. SB47-D-02-00200R00 Finishing Stand
4. Single Vaccum Pump Stand.
5. Double Vaccum Pump Stand.
6. Low Height IBC Stand.
7. MPRP Glass Rolling Trolley.
8. NSW TSW Balsa Foam Trolley.
9. NSW TSW Glass Laying Trolley.
10. Portable Heater Trolley.
11. BT-CS-CS Lid Glass Kit Trolley.
12. Hexagonal Trolley For Vertical Roll.

Any other job we can not done because of we are not able to do work at any other place. We are working at our site.

Terms :
Labour Charges RS. Per Kgs.
All Raw Materials & Colour ,Electricity are in our Scope.
Tools, Machineries & Consumable like welding Rod, Gases and Electricity are in our Scope.
Transportation will be in your Scope.
Taxes as actual are applicable.

Awaiting your positive reply.

[Buy] Flexible Pvc Lining For Tanks

Sat, 24 Dec 2011 11:54:00 +0530

We have 3 M.S.tanks having size 13.5Mtr.X0.8Mtr.X0.65Mtr, Requires Flexible PVC lining from inside. This work is to be carried out at MIDC Baramati, Dist - Pune.

It is requested to quote accordingly with material.

[Buy] Stator Assembly Semi Auto Machine

Tue, 29 Nov 2011 10:16:00 +0530

Would like to know if your company can fabricate Stator Assembly semi auto machine as a sub- assembly process.

Kindly inform us immediately.

[Buy] Steel Fabrication

Tue, 13 Sep 2011 15:35:00 +0530

We are largest sign manufacturer and traffic control equipment supplier in Australia.

Interested to purchase steel products made by you.

So please send your quotation, prices asap.

[Buy] Mobile Cabins

Tue, 23 Aug 2011 18:14:00 +0530

We have a requirement of mobile cabins, apreciate if your could kindly forward your company's profile/list of companies from middle-east your company dealing with.

Kindly contact us asap.