Tradeindia.com - Sell leads in Automobile & Parts Agent

[Sell] Steel Wheel Rim

Fri, 20 Nov 2009 11:18:00 +0530

Size : 7.50V-20
Equipped with Tire : 10.00-20
Bolt No. : 10/8
Dia : 23/32/26mm
P.C.D. : 335/285.75/275mm
B.C.D. : 285/220/222/281/214mm
Offset : 0/163mm
Thickness : 14/12mm
Unit weight : 51/52/50kg
Quanitity/20 : 360sets

Various specifications (for tube type and for tubeless) are available. Disc thickness & bolt hole & weight can be made according to customers request.

If you are interested in trailer wheel rims, please contact us.

[Sell] Plastic Automotive Parts Moulds

Wed, 11 Nov 2009 14:08:00 +0530

Plastic automotive parts/components moulds We offer are made of high quality imported steel:

These Moulds are available to you with low cost, Short delivery time, and long mould life.

For more details, please feel free to contact us.

[Sell] Optical Programming System

Wed, 28 Oct 2009 11:16:00 +0530

Optical programming system is mainly used for diagnosis and programming BMW vehicles after E65 series .

OPS unit with DIS software is used for diagnosis, which is carried out via OBD-II socket .
OPS unit with SSS software is used for programming, which is carried out via OBD-II socket and MOST socket .

Optical programming system (OPS) for programming vehicles is handled in exactly the same way as the OPPS. The connection is effected simultaneously to the OBD II socket and also to the MOST fiber-optic access in the vehicle. The connection to the workshop network is effected via network cable to a free network connection.
Like the OPPS, the OPS does not have an air interface, as the high bandwidth required for programming can currently only be achieved by means of a cable connection.

Suitable:

1.Diagnosing and programming all BMW vehicle with OBD II.
2.unavailable for the BMW vehicles with 20 pins

Characteristic:

The speed of programming of OPS is quicker via OBD II socket than GT1
The most important character of OPS is that it can be used for diagnosing and programming the computer modules which sockets are Most sockets.

Attention:
E60, E65, E87, E90 have both OBD II socket and Most socket.

Advantages of our OPS :

Good after-sales service: maintenance, warranty period
and free upgrade last one year.

New version, high speed. A few GT1 in the market are
secondhand products, which are old version with slow speed.
SSS V28 (IBM T30 Software Service, Many kinds of Languages )
SSS V32(HP PC Software Service Station, Many kinds of Languages)

Configuration : one set HP computer+ sss software
Characteristic: updated through DVD, 100% the same with original.

Package:
1.OPS multiplexer
2.OBD-II diagnostic cable
3.LAN cable
4.OPS MOST cable
5.Latest diagnostic version of software DIS=V53 SSS=V28 (one HDD)

Warranty: one-year product quality warranty

[Sell] GM Series Hydraulic Motor

Fri, 16 Oct 2009 10:37:00 +0530

GM series hydraulic motors, which are also called radial piston hydraulic motors, incorporates a number of design variations with respect to many series intended to increase the strength of the motor casings and the load capacity of the internal dynamic components.
Features

1. High mechanical efficiency high starting torque

GM Series motors reduce friction loss in force transmission because of no side force between piston and swing cylinder, hydrostatic balance designed in piston foot and transferring torque force through roller bearing. Therefore, GM series hydraulic motors have high mechanical efficiency and high starting torque (above 0.92).

2. High volumetric efficiency

The flat distributor is simple, reliable and good seal and theres no leakage between piston and swing cylinder through using plastic seal ring, so motors have high volumetric efficiency.
3. High specific speed range

Because of reducing friction loss in configuration and improving seal ability, these motors can run steadily in 1 r/min condition. Moreover, theres no gap between piston and bearing cover connected by ring clip, so they can run with high speed when inlet is sealed and the ratio (max speed) is higher than any other type of equivalent hydraulic motor, giving greater flexibility of application.

4. Minimize heat generation, due to the reduced friction area.

5. Low noise, high lifetime, high power and high external loads.

These series motors have high pressure, with the Max pressure 45Mpa, light weight, small volume, high power;

Please contact us for more details.

[Sell] Renault Can Clip Diagnostic Interface V85

Tue, 13 Oct 2009 15:15:00 +0530

Detailed information of the product Renault CAN Clip Diagnostic Interface V85 we offer>>

Product Name : Renault CAN Clip Diagnostic Interface
Net Weight : 3.5KG

Description:
Clip"s main menu allows you to: see all the information relating to the vehicle look at the function you want to use:- computer test
- Automatic test of all computers
- Reprogramming
- Airbag test
- Scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- Anti-pollution
- Multimeter

Renault CAN Clip set includes :

CAN Clip Interface
2 cables for CAN Clip <-> Car connection
1 cable for CAN Clip <-> PC connection
1 software CD (CLIP v85 now, can be installed on ANY PC)

Please mail us, for requirement.

[Sell] Used Cars

Mon, 31 Aug 2009 17:17:00 +0530

Japan Used Cars Left/Right Hand Drive Exporter to Worldwide, We are member of all Japan Used Cars/Equipment Auctions, Join Free Auction Membership where you can find lot of Used/New Cars, Reasonable Agent Fees.

For more details, please mail us.

[Sell] CD Changers Car

Tue, 25 Aug 2009 15:59:00 +0530

Charmaker CD Changers Car delivers CD-quality sound directly into the factory sound system via the CD changer port, without the loss of sound quality that occurs with existing cassette and FM transmitter solutions. Directly connect to your car radio by a vehicle specific cable harness, and directly control from car stereo panel or steering wheel, user only need a SD card or USB disk, then you can enjoy the digital music (MP3/WMA) what you like in your car, Because you can download the music that you like from internet put into SD card or USB disk, these music could be edited and played freely. And there also is Aux input for external audio sources, Auxiliary devices such as MP3 players, Portable DVD players, Minidisk Player, handheld gaming systems, notebook computers and IPHONE can be added to the OEM radio while delivering optimum sound quality.

Car CD MP3 Changer is a innovative production, its character as bellows:
Features:
. Direct Connection with CD quality sound
. Without the loss of sound quality that occurs with FM transmitter solutions.
. Control Digital Music changer from your car radio panel or steering wheel.
. Support USB Disk, SD Card and 3.5mm jack input.
. Widely extends external audio sources, such as: PC, MD, PSD, GPS Navigation and Mobile Phone
. Building in high quality MP3/WMA decoder
. Building in Amplifier chips
. One panel with different cable for different car
. No signal interfere, No battery required
. Easy to install and use

Compatible with
. Compatible with OEM radio: Toyota, Honda, Volkswagen, Mazda, Hyundai, Audi, Skoda
. Compatible with aftermarket Radio: Panasonic, Sony, Alpine M-bus, Clarion Ce-net, Pioneer and Sanyo

[Sell] Hydraulic Rubber Hose Sae 100r1at/Din En 853 1sn

Mon, 10 Aug 2009 12:51:00 +0530

We offer Hydraulic Rubber Hose Sae 100r1at/Din En 853 1sn.

CONSTRUCTION:
This hose consists of an inner tube of oil-resistant synthetic rubber, a single wire braid reinforcement, and an oil- and weather-resistant synthetic rubber cover.

APPLICATIONS:
Hose range suitable to carry hydraulic fluids, such as glycol, mineral oils, emulsion, hydrocarbons. etc.
WORKING TEMPERATURE:
From -40C up to +100C

Hydraulics hose SAE 100R1AT/DIN EN 853 1SN

Size (Inch) Inside Diameter Reinforcement Outside Diameter Proof Pressure Working Pressure Burst Pressure Bend Radius
Nom (mm) Min (mm) Max (mm) Min (mm) Max (mm) Min (mm) Max (mm) (Bar) (Psi) (Bar) (Psi) (Bar) (Psi) (mm)
3/16" 4.8 4.6 5.4 8.9 10.1 12.5 413 6000 207 3000 827 12000 89
1/4" 6.4 6.2 7.0 10.6 11.7 14.1 379 5500 189 2750 758 11000 102
5/16" 7.9 7.7 8.5 12.1 13.3 15.7 345 5000 172 2500 689 10000 114
3/8" 9.5 9.3 10.1 14.5 15.7 18.1 310 4500 155 2250 620 9000 127
1/2" 12.7 12.3 13.5 17.5 19.0 21.5 276 4000 138 2000 551 8000 178
5/8" 15.9 15.5 16.7 20.6 22.2 24.7 207 3000 103 1500 413 6000 203
3/4" 19.0 18.6 19.8 24.6 26.2 28.6 172 2500 86 1250 345 5000 241
7/8" 22.2 21.8 23.0 27.8 29.4 31.8 155 2250 78 1125 310 4500 279
1" 25.4 25.0 26.4 32.5 34.1 36.6 138 2000 69 1000 276 4000 305
1 1/4" 31.8 31.4 33.0 39.3 41.7 44.8 86 1250 43 625 172 2500 419
1 1/2" 38.1 37.7 39.3 45.6 48.0 52.0 69 1000 34 500 138 2000 508
2" 50.8 50.4 52.0 58.7 61.9 65.9 52 750 26 375 103 1500 635

For any further information feel free to contact us.

[Sell] Steel Wheel Rim

Mon, 06 Jul 2009 16:53:00 +0530

We offer steel wheel rim.

Size 5.50-16
Equipped with tire 7.00-16/ 7.50-16
BOLT NO. 6/5/10
DIA 32/29/21/20.5/27
P.C.D. 222.25/205/203.5/180/190/184/208
B.C.D. 163/161/146/161.5/140/133/150
OFFSET 124/122/120/127/117/125
DISC THICKNESS 10/12
UNIT WEIGHE 20/17.5/19.5/
QUANTITY/ 20 9000
Various specifications (for tube type and for tubeless) are available. Disc thickness & bolt hole & weight can be made according to customers request.

If you are interested in trailer wheel rims, please contact us.

[Sell] Komatsu Cylinder Head

Sat, 23 May 2009 14:13:00 +0530

We are manufacturing and supplying the cylinder head and crankshaft from china. We are specialized in producing cylinder head and crank shaft, some part of our product are as follows:

NISSAN cylinder head: TD25/TD27/TD27T/TD42/LD23/SD22/SD23/Z20/Z24/NA20
KOMATSU cylinder head: 4D94E/6D95/6D105/4D130/S4D95
SUZUKI cylinder head: F8A/F8B/F10A
TOYOTA cylinder head: 2H/3B/2L/2L2/2LT/3L/5L/2J/1Z/2Z/1DZ/2C/3C-TE
MITSUBISHI cylinder head: S4S/S6K/6BG1/4HF1/4D30/4D31/4D32/4D33/4D34
ISUZU cylinder head: 4JA1/4JB1/4JB1T/4JG2/4BA1/4BD1/4BD2T/6BD1
COMMINS cylinder head: 4BT/6BT/6CT/NT855/K19/K38
DEUTZ cylinder head: FL1912/FL912W/FL913

If you are interested in our products, kindly please contact us for more information.

[Sell] Sell Suzuki Cylinder Head:F8a /F8b /F10a

Sat, 23 May 2009 14:11:00 +0530

We are manufacturing and supplying the cylinder head and crankshaft from china.

We are specialized in producing cylinder head and crank shaft, some part of our product are as follows:

NISSAN cylinder head: TD25/TD27/TD27T/TD42/LD23/SD22/SD23/Z20/Z24/NA20
KOMATSU cylinder head: 4D94E/6D95/6D105/4D130/S4D95
SUZUKI cylinder head: F8A/F8B/F10A
TOYOTA cylinder head: 2H/3B/2L/2L2/2LT/3L/5L/2J/1Z/2Z/1DZ/2C/3C-TE
MITSUBISHI cylinder head: S4S/S6K/6BG1/4HF1/4D30/4D31/4D32/4D33/4D34
ISUZU cylinder head: 4JA1/4JB1/4JB1T/4JG2/4BA1/4BD1/4BD2T/6BD1
COMMINS cylinder head: 4BT/6BT/6CT/NT855/K19/K38
DEUTZ cylinder head: FL1912/FL912W/FL913

If you are interested in our products, kindly please contact us for more information.

[Sell] Commins Cylinder Head

Sat, 23 May 2009 13:00:00 +0530

We are manufacturing and supplying the cylinder head and crankshaft from china. How are you,we are Guizhou YuYa Auto parts Manufacturing co.,ltd, was founded in 1992, we are specialized in producing cylinder head and crank shaft, some part of our product are as follows:
NISSAN cylinder head:TD25/TD27/TD27T/TD42/LD23/SD22/SD23/Z20/Z24/NA20
KOMATSU cylinder head: 4D94E/6D95/6D105/4D130/S4D95
SUZUKI cylinder head: F8A/F8B/F10A
TOYOTA cylinder head: 2H 3B/2L/2L2/2LT/3L/5L/2J/1Z/2Z/1DZ/2C/3C-TE
MITSUBISHI cylinder head: S4S/S6K/6BG1/4HF1/4D30/4D31/4D32/4D33/4D34
ISUZU cylinder head: 4JA1/4JB1/4JB1T/4JG2/4BA1/4BD1/4BD2T/6BD1
COMMINS cylinder head: 4BT/6BT/6CT/NT855/K19/K38
DEUTZ cylinder head: FL1912/FL912W/FL913

If you are interested in our products, kindly please contact us for more information.

[Sell] Mini Truck & Mini Van

Tue, 05 May 2009 11:42:00 +0530

We offer Mini Truck & Mini Van.

CH series mini truck 400KG--1000KG, 1 or 2 Row Seats in Driver carbine. Mini Van: 4--9 persons. With LHD and RHD type, CKD parts supply also available but only based big quantity. We also supply the CKD parts for support the assemble in your side.

Please contact us for more details.

[Sell] Air Cool Block For Deutz Fl 913

Mon, 13 Apr 2009 16:01:00 +0530

Esteem Auto Pvt. Ltd. is an ISO-9001:2000 certified leading manufacturer and exporter of wet & dry cylinder liners, sleeves, air cooled blocks and custom made casting parts for automobile and industrial engine applications. We are in this business for past 30 years and now produce over 1 million cylinder liners per year. We take great pride in our more than 200 plus employees, who are well experienced and technically qualified to produce highest quality product.

For more information, kindly contact us.

[Sell] Rubber Mounting

Fri, 09 Jan 2009 10:06:00 +0530

Apex exports manufactures of all kind of rubber mounting, rubbers bushes, radiator hose and industrial mounting for truck, car & forklift.

Our rubber mounting assembly that are used in various kinds of vehicles. These are available in different dimensions and can be customized in size to meet the clients specific requirements.

We also develop mountings as per samples.

Please feel free to contact us.