Tradeindia.com - Sell leads in Industrial Chemicals

[Sell] Oil Painting Thinner

Fri, 25 May 2012 11:59:00 +0530

Our company is highly acclaimed in offering a wide range of Oil Painting Thinner.

Thinner is a mixture of esters, glycol, aromatic solvents and ketones suitable diluents to all nitro products. It is manufactured for reducing lacquers before they are applied by different methods. Advantages quickly reduces the consistency of the lacquer/paint to the required degree, Improves film smoothness of lacquers/paint when

Applied either by spray or dipping thus extending excellent finish. Lacquer/paint dries without blushing, resin blush, pin holing and other surface defects, no orange peel developed after the evaporation of Thinner, and therefore increases the tensile strength of the film along with its gloss.

[Sell] Re-Dispersible Polymer Powder For Dry Mixed Mortar

Wed, 23 May 2012 10:18:00 +0530

re-dispersible polymer powder for dry mixed mortar
redispersible latex powder is the cement, lime, gypsum and other cementitious material modification of the most effective, not only to have a certain strength, but also has good water resistance, flexibility, breathability, impact resistance, with the Of the substrate (cement, bricks, glass, steel, timber, etc.) have a very good bond of.
Can be further dispersion of latex powder mainly used for building insulation, adhesives, hand-mortar and tile adhesive, Qian Feng agent, interface with wall plaster, putty in the external walls, flexible putty, elastic coating, repair mortars, self-leveling mortar , The powder particles of polystyrene insulation, such as size, has a very broad scope of use and good market prospects.
Further spread of the use of latex powder can improve the variety of cementing material and mortar variety of performance, such as: increased cohesive force, cohesion and lower modulus of elasticity, improve the bending strength and enhance flexible, improve impact resistance and Wear resistance, reduced water absorption, and improve water retention and increase and improve the construction and so on. Jing Bao from a very small amount of licensing can be further dispersion of latex powder and mineral powder consisting of thickening powder ordinary masonry mortar with a very good and easy and high cohesive force, with brick, block construction of the building from With extraordinary intensity, I really can be "Guruojintang" to describe.
Jing Bao licensing can be dispersion of latex powder non-toxic, harmless, no environmental pollution, transport convenience, easy storage and easy to use, the mortar is the best partner.

[Sell] Aluminium Sulphate Fertilizers Grade 99%

Tue, 22 May 2012 15:26:00 +0530

Specifications:

Aluminium Sulphate15.8%-16.5%(Iron Free)

Appearance : Slight Greenish Flakes or Powder

Al2O3 %min 15.8

Al2(SO4)3 %min56.5-57.5

Fe2O3 %max 0.50

Insoluble Material (T.S.S) %max 0.15

PH(10% Aqueous solution) min 3.0

Heavy Metals as Pb %max 0.001

AS %max 0.0005

Grain Size (2-15)mm

Aluminium Sulphate 15.8%-17.5%(Ironless)

Appearance:Granular,Powder,Lump,Crystal

Al2O3 %min 16-17.5

Al2(SO4)3 %min 56.5-57.5

Fe2O3 %max 0.005

Insoluble Material (T.S.S) %max 0.05

PH(10% Aqueous Solution) min 3.0

Heavy Metals as Pb %max 0.001

AS %max 0.0005

Grain Size (2-5)mm

Purity:Al2O3 contant 15.8%,16%,16.5%,17%,17.5%

Appearance:Flakes,Granular,Powder,Lump,Crystal

CAS No. 10043-01-3

EINECS number: 233-135-0

Molecular formula: Al2(SO4)3

Molecular weight: 342.15 g/mol(anhydrous)

648.41g/mol(octadecahydrate)

Application :

1.Use for the paper making,

2. Water purification,

3.It is used as mordant,

4.Tanning the pharmaceutical of leather,

5.Medical astringent,

6 timber preservative,

7.Foam fire extinguishing agent,etc.

[Sell] Hydroxypropyl Methyl Cellulose

Tue, 22 May 2012 13:14:00 +0530

Physical and Chemical properties:
1. Appearance: white or off-white granules or powder, odorless and tasteless powder.
2. Carbonation temperature:280 -300
3. Density: 0.25-0.70g /cm3
4. Temperature to change color:190 -200
5. Surface tension:42-56dyn/cm at 2% solution
6. Dissolubility: It can dissolve in water, and some solvent, such as alcohol/water, propanol/water. Aqueous solution with a surface-active, high level of transparency, stability performance. Different specification has different gel temperature; furthermore, the solubility will change with their viscosity, that is the lower of the viscosity, the greater solubility.
Application:
The product is widely used in building construction, building materials, dispersing coating, wall paper coating, polymerization aids, varnish remover, food, leather, food, leather, printing ink paper and etc working as thickener, adhesive, moisture retentive agent, film former, and emulsifier and so on. Furthermore, it also has a wide use in oil drilling and daily chemical industry.
Package, storage and transportation
Package: Plastics-paper bag outside, lined with PVC bag.
Storage: seal tightly. Exposing to the sun and rain is forbidden, to avoid absorption of moisture and contact with acid and alkali.
Transportation: As common moisture-proof chemicals.

[Sell] Hydroxyethyl Cellulose

Tue, 22 May 2012 13:08:00 +0530

As a non ionic surfactant, HEC has the functions such as thickening, suspension, emulsification, adhesion, film formation, dispersion, water retention, providing protection and the following properties:
1. HEC is soluble in heat water or cold water, it don't precipitate under high temperature or boiling, solubility and viscosity changes in a wide range;
2. Because of its non ionic property, it can coexist with other water-soluble polymer, surfactants and salts in wide range, is an excellent colloid thickener for high-concentration electrolyte solution;
3. Its water retention is twice of methyl cellulose, with excellent flow controll ability;
4. Its dispersibility is the worst compared with methyl cellulose and hydroxypropyl cellulose, but the protection power for colloid is the strongest.

[Sell] Hydroxypropyl Methyl Cellulose

Tue, 22 May 2012 12:42:00 +0530

Product: Hydroxypropyl Methyl Cellulose
Appearance:white or similar white granules or powder
Methoxyl group:28-30%
Hydroxyl propyl group:7-12%
Gel temperature 58-65
PH value 5.0-7.5
Viscosity2% solution20 4,000--200,000mPa.s
Particle size 80-100mesh
Water content 5.0%
Ash content 0.5%

[Sell] Trichloroethylene

Mon, 21 May 2012 20:39:00 +0530

Name : Trichloroethylene (Industrial)

Chemical formula : C2HCl3
Molecular mass : 131,4
Appearance Colorless transparent liquid without mechanical admixtures.
Specifications Main substance content, % by mass 98,5-99,2
Water content, % by mass 0,015-0,02
Chlorine ion content, % by mass 0,00015-0,0003
Volatile residue content, % by mass 0,0015-0,003

[Sell] Methylene Chloride

Mon, 21 May 2012 20:39:00 +0530

We offer Methylene Chloride in 280 kg steel drums.

CAS No. 75-09-2 Chemical Formula CH2Cl2
Methylene Chloride content, % by mass, min 99,7
Specific gravity at 20oC, g/cm3, within 1,326-1,328
Water content, % by mass, max 0,01
Residue on Evaporation , % by mass, max 0,0005
Iron content, % by mass, max 0,0001
Acids content, as per HCl, % by mass, max 0,0004
Chloroorganic compounds content, % by mass, max
0,23

[Sell] Titanium Dioxide

Mon, 21 May 2012 12:47:00 +0530

Product name: titanium dioxide

Molecular Formula: TiO2

CAS No: 12137-20-1

Certificate:ISO9001:2000

Purity:

Titanium Dioxide Rutile93%

Titanium Dioxide Anatase99%

Applications:

It widely used in coatings,inks,ceramics,glass,and other industries to make paint color:It used as a filler in paper making industry.in rubber industry used for coloring and printing paste in chemical fiber, printing and dyeing industry,also can be used in cosmetics, medicine coat and food industries.

[Sell] Isoocty Thioglycolate

Mon, 21 May 2012 12:17:00 +0530

Product: Isoocty Thioglycolate

1.OEM

2. Important intermediate in pesticide,medicine,organic synthesis and fine chemical;

3. High quality low price.

Detailed Product Description

Specification:

Appearance Colorless transparent liquid

Purity 99.5%

Specific gravity 0.9730-0.9737

Chroma(PC-co) 5max

Specifications

Molecular formula: HSCH2COOC8H17

Purity: 99.5%

Packing: 200 kg/plastic drum

Ethylhexyl Thioglycolate/Isooctyl thioglycolate (isooctyl mercaptoacetate)

Molecular formula: HSCH2COOC8H17

CAS code: 25103-09-7

Appearance and propertities:

Colorless transparent liquid oils to flow,insoluble in water,soluble in alcohol and aether,special smell

Application: Important intermediates in pesticide, medicine, organic synthesis and fine chemical; main material for producing mercaptan tin and mercaptan antimony; used as thermal stabilizer for polyolefin; catalyst for bisphenol A.

Specifications:

Appearance
Colorless transparent liquid

Purity
99.5%

Density(20C)
0.9730-0.9737

Chroma(pc-co)
5

Packaging: 200 kg/plastic drum

Storage and transportation:

Away from direct sunlight, heat and stored in a cool ventilated place. Handle carefully. avoid damp.

[Sell] Ammonia

Fri, 18 May 2012 16:06:00 +0530

Our client can avail from us an wide range Ammonia. Our quality product used in various industries. Offering the best solutions for numerous consumers, we are successfully catering to the basic needs and requirements of the modern world. We are offering outstanding quality products which are procured from authorized and trusted vendors, our quality controllers maintains through quality checking norms. With the aim to provide our clients with unsurpassed quality products. These are available at market leading price.

For more details kindly contact us.

[Sell] Caustic Soda

Fri, 18 May 2012 11:42:00 +0530

We are offering wide range of Caustic Soda. we are offering qualitative range of products to our valued clients worldwide. We procure our quality range only from reliable and trusted vendors which are present in the market. These are known for their features of purity, accurate composition and precise pH value. These are available at market leading price.

For more details kindly contact us.

[Sell] Road Dust Control

Thu, 17 May 2012 21:09:00 +0530

Lignosulphonate is a naturally occurring polymer found in wood that acts like glue holding the cellulose fibers of pulp together. During the pulping process, lignin is separated from the wood and undergoes an extensive process and eventually becomes an calcium or sodium based lignosulphonate.
Lignosulphonate works by binding the road surface particles together. Water evaporates from the lignin as it dries, and the dust particles are trapped by the high-viscosity, naturally sticky material. In addition, over time the lignin becomes completely insoluble due to solar heating.
Uses & Application
Used on cities, counties and haul roads
Feed lots
Construction areas
Tree/Flowers/Nurseries
Orchards
Forest/timber haul roads
Recommendations
In preparation for applying lignosulfonate as a dust suppressant, roads should first be re-crowned with a grader. Pre-wetting the road is recommended for best results. Lignin can also be applied without pre-wetting if water is not accessible, although results will vary depending on moisture content of the road base. Application rates for a topical application are 0.3-0.5 gallons per square yard.
Features & Benefits
Non-Chloride Product (Greener)
Reduce dust to PM10 Standards
Can be used on many soil types
Can be used in sensitive areas (near water, trees, orchards)
Water Resistant
All-Natural

[Sell] Benzoyl Peroxide