Tradeindia.com - Sell leads in Plastics & Products

[Sell] GPPS

Fri, 06 Nov 2009 11:11:00 +0530

GPPS is a clear polymer that exhibits high stiffness, good dimensional stability, low specific gravity and excellent electrical properties. It offers several advantages over other polymers because of its clarity and ease of processing, both of which are due to its amorphous nature.

Application:

GPPS has a relatively low cost and is forgiving when processed at high production rates. Extrusion and injection molding continue to be the predominant processing technologies for PS. Key end use markets for PS include food packaging, refrigeration, audio/video, consumer electronics and office equipment, medical devices, and toys.

For any further information feel free to contact us.

[Sell] Acrylonitrile butadiene styrene (ABS)

Fri, 06 Nov 2009 11:11:00 +0530

ABS is derived from acrylonitrile, butadiene, and styrene. Acrylonitrile is a synthetic monomer produced from propylene and ammonia; butadiene is a petroleum hydrocarbon obtained from the C4 fraction of steam cracking; styrene monomer is made by dehydrogenation of ethyl benzene - a hydrocarbon obtained in the reaction of ethylene and benzene. The advantage of ABS is that this material combines the strength and rigidity of the acrylonitrile and styrene polymers with the toughness of the polybutadiene rubber. The most important mechanical properties of ABS are resistance and toughness.

A variety of modifications can be made to improve impact resistance, toughness, and heat resistance. The impact resistance can be amplified by increasing the proportions of polybutadiene in relation to styrene and also acrylonitrile although this causes changes in other properties. Impact resistance does not fall off rapidly at lower temperatures. Stability under load is excellent with limited loads.

For any further information feel free to contact us.

[Sell] SBS

Fri, 06 Nov 2009 11:11:00 +0530

Polystyrene is also part of a type of hard rubber called poly(styrene-butadiene-styrene), or SBS rubber. SBS rubber is a thermoplastic elastomer. That means it acts like plastic and rubber at the same time.

This stuff is good for things that are made in molds (like plastics), but still need to be rubbery. A good example is the bottoms of running shoes. Most of these are SBS rubber

For any further information feel free to contact us.

[Sell] HIPS

Fri, 06 Nov 2009 11:11:00 +0530

We offer HIPS.

Structure and properties:

The chemical makeup of polystyrene is a long chain hydrocarbon with every other carbon connected to a phenyl group (the name given to the aromatic ring benzene, when bonded to complex carbon substituents). Polystyrene's chemical formula is (C8H8)n; it contains the chemical elements carbon and hydrogen. Because it is an aromatic hydrocarbon, it burns with an orange-yellow flame, giving off soot, as opposed to non-aromatic hydrocarbon polymers such as polyethylene, which burn with a light yellow flame (often with a blue tinge) and no soot. Complete oxidation of polystyrene produces only carbon dioxide and water vapor.

For any further information feel free to contact us.

[Sell] Plastic Tube

Thu, 05 Nov 2009 17:27:00 +0530

Detail description:

Plastic tubes are widely used in cosmetic tube, medicine tube etc. Such as packaging of sunblock, hair gel, shave gel, nourishing cream, skin care products etc.

1). Material of tube: PE.
2). Diameter: 13mm, 16mm, 19mm, 22mm, 25mm, 30mm, 35mm, 38mm, 40mm, 50mm.
3). Volume: 3ml-250ml
4). Cap: flip cap, screw cap etc, and color can be customized.
5). Printing: 6 color printing according to customer requirement.
6). Color of tube: white, transparent and red etc, any color can be customized
7). Minimum order quantity: 20,000pcs/kind
8). Usage: cosmetic tube, medicine tube etc. Such as packaging of sunblock, hair gel, shave gel, nourishing cream, skin care products etc.

For more details please contact us.

[Sell] Plastic Scrap

Thu, 05 Nov 2009 16:54:00 +0530

All kinds of engineering plastic powder and granules.
We deal majorly in PP, ABS, Delrin, PC, HDPE, LDPE, Nylon. we also deal in other plastic granules.

Please feel free to contact us.

[Sell] Pet Plastics Jars

Thu, 05 Nov 2009 16:17:00 +0530

We are manufacturers and exporters of pet plastics jar and which is widely used in many industries. We are here for our clients, our products pet jars that are manufacture using safe as well as hygienic raw materials. These jars come with tight caps so to store the materials properly without any leakage or spillage. Our products are superior in quality, which are available in various shapes, sizes and patterns.

For any further information feel free to contact su.

[Sell] Pet Preforms

Thu, 05 Nov 2009 16:17:00 +0530

We are manufacturer and exporter of pet performs. We offer a good quality of products. We offer a variety of PET Preform and Bottle Products. We specialize in CUSTOM, MADE-TO-ORDER products. We can help you select the appropriate perform for your bottle design. These are available in different sizes, shapes and can also be customized as per the requirement of our client.

For any further information feel free to contact us.

[Sell] PVC Foam Sheet

Thu, 05 Nov 2009 15:14:00 +0530

= Size : 1220*2440 1560*3050 2050*3050mm

= Thickness : 1--25mm

= Density : 0.48-1.2g/cm3

= MOQ : 200pcs

= Packing : Poly-bag

Kindly contact us, for requirement.

[Sell] PVC Sheet

Thu, 05 Nov 2009 15:13:00 +0530

Size : 1220*2440 1560*3050 2050*3050mm

Thickness : 1--25mm

Density : 0.48-1.2g/cm3

MOQ : 200pcs

Packing : poly-bag

For more details, please contact.

[Sell] pvc card

Thu, 05 Nov 2009 00:00:00 +0530

size:1220*2440 1560*3050 2050*3050mm
thickness:1--25mm
dnsity:0.48-1.2g/cm3
MOQ:200pcs
packing:poly-bag

[Sell] Nylon 612

Wed, 04 Nov 2009 16:25:00 +0530

Compared with nylon6 and nylon66,Nyon612 is more softer,lower water absorption ratio and good resistance to low temperature and good dimensional stability. It is a self-extinguishing material with good oil-proof and chemical proof properties and good electrical performance. We do the nylon612 polymerization by ourself. In the other hand we also do the modifed products base on nylon 612. Such as pre-colored,filled,reinforced, flame retardant.....to meet customer different application. The reinforced products can meet the Dupont 77G33L, 77G43L technical data.The applicatons we had now as follow:It is be used as raw material for industry brush and toothbrush filament production.It also be used as the raw material for screen plate and filter which be immersed into water during working time. It is be used as the raw material to do the stabilizer and the products conveyer in the petroleum industry. It is also be used as raw material to do the monofilament in the textile industry. It is be used as raw material to do the cable cladding.we will also develop new products to meet customer's new request.

[Sell] Nylon 1212

Wed, 04 Nov 2009 16:25:00 +0530

The nylon 1212 development solely and uniquely by the R&D Center of our company which has filled in the gap of China and has been rated to meet PA11 and PA12 standards in respect of performances and indexes through appraisal by the authoritative agencies in China.
Compared with nylon6 and nylon66,nylon 610,nylon612, Nylon1212 has super-high tenacity,lowest water absorption ratio and excellent resistance to low temperature and good dimensional stability, good wear resistance, low in process shrinkage,good in process moulding. It is a self-extinguishing material with good oil-proof and chemical proof properties and good electrical performance. We do the nylon1212 polymerization by ourself. In the other hand we also do the modifed products base on nylon1212. Such as pre-colored,filled,reinforced, flame retardant.....to meet customer different application.The applicatons we had now as follow: It is be used as raw material to do the monofilament in the textile industry. It is mainly used as the material for brake pipes,oil pipes, threading pipes and flexible pipes for air-conditioner. It can be used in automobile limbs electron household electrical appliance and mechanism limbs as well as other applications requiring high tenacity,low-temperature resistance, high strength and wear resistance.we will also develop new products to meet customer's new request.

[Sell] Nylon 610

Wed, 04 Nov 2009 15:36:00 +0530

Compared with nylon6 and nylon66, Nylon 610 is more softer,lower water absorption ratio and good resistance to low temperature and good dimensional stability. It is a self-extinguishing material with good oil-proof and chemical proof properties and good electrical performance. We do the nylon610 polymerization by ourself. In the other hand we also do the modifed products base on nylon 610. Such as pre-colored,filled,reinforced, flame retardant.....to meet customer different application.

The applications we had now as follow: It is be used as raw material for industry brush and toothbrush filament production. It also be used as the raw material for screen plate and filter which be immersed into water during working time. It is be used as the raw material to do the stabilizer and the products conveyer in the petroleum industry. It is also be used as raw material to do the monofilament in the texture industry. It is be used as raw material to do the cable cladding.we will also develop new products to meet customer's new request. In the last, the PA610 has been sold to Korea, South Africa, America, Japan, Europea...

[Sell] Plastic Raw Materials

Wed, 04 Nov 2009 14:16:00 +0530

At Tulsi we are manufacturing plastic raw material since 1993 including PP, RP, HM, LD and etc, these raw materials are made by recycling of polythene bags and other plastic wastes. General consumer plastic products are made by these raw materials like budgets tumblers, canes, water tanks, flexible pipes, plastic chairs and other machinery products.

For more details please contact us.

[Sell] Polycarbonate sheet Size: 0.3-1.5mm3feet6feet

Tue, 03 Nov 2009 16:24:00 +0530

GoRun-PC-HG-11 polished/polished

thickness: 0.3mm,0.5mm,0.7mm, 0.8mm,0.9mm,1.0mm, 1.2mm,1.5mm

Size:915mm*1830mm,1000mm*2000mm

[Sell] Polycarbonate sheet Thickness:0.5mm

Tue, 03 Nov 2009 16:24:00 +0530

GoRun-PC-HG-11 polished/polished

thickness: 0.3mm,0.5mm,0.7mm, 0.8mm,0.9mm,1.0mm, 1.2mm,1.5mm

Size:915mm*1830mm,1000mm*2000mm

[Sell] Polycarbonate Sheets

Tue, 03 Nov 2009 15:02:00 +0530

GoRun-PC-HG-11 polished/polished

Thickness: 0.3mm,0.5mm,0.7mm, 0.8mm,0.9mm,1.0mm, 1.2mm,1.3mm,1.5mm

Size: 915mm*1830mm,1000mm*2000mm

For more details, feel free to contact us.

[Sell] Flame Retardant BDP

Tue, 03 Nov 2009 12:39:00 +0530

We offer BDP Bisphenol-A bis(diphenyl phosphate)

Abbreviation BDP BPADP
Molecular formula: C39H34O8P2
Molecular weight: 692.23
Uses: It is the high relatively molecular quality halogen-free, phosphorus-based flame retardant, low-toxic, good stability, good water-solubility resistance. It is used as flame retardant for HIPS PC PPO PPO/HIPS PC/ABS , cellulose resin, synthetic rubber, polyester fibre, modified MPPO, etc., low transference, low volatility, can improve the heat aging property, improve the heat transfiguration temperature, can improve flexibility, in the mould can keep the excellent fluidity, decrease ablation, and also used as flame retardant for lubricating oil etc.
Toxicity: almost no toxicity.
Packing: In galvanized drum of 250kg.net each.

If you are interested, please feel free to contact us.

[Sell] Plastics Handel

Tue, 03 Nov 2009 12:26:00 +0530

we have a manufacturing unite for plastics injacsation molding
and 12 years experience.

We are doing Plastics Handel & Plastics Bamboo sticks for using
Jut bags, non woven bags, polithen bags & cloth bags. These hangers at affordable prices that are known for their durable and long lasting properties.

We have 16 type of modals in Handel. We all so doing companies job work.

Please feel feel free to contact us.

Tradeindia.com - Sell leads in Plastics & Products

[Sell] GPPS

[Sell] Acrylonitrile butadiene styrene (ABS)

[Sell] SBS

[Sell] HIPS

[Sell] Plastic Tube

[Sell] Plastic Scrap

[Sell] Pet Plastics Jars

[Sell] Pet Preforms

[Sell] PVC Foam Sheet

[Sell] PVC Sheet

[Sell] pvc card

[Sell] Nylon 612

[Sell] Nylon 1212

[Sell] Nylon 610

[Sell] Plastic Raw Materials

[Sell] Polycarbonate sheet Size: 0.3-1.5mm*3feet*6feet

[Sell] Polycarbonate sheet Thickness:0.5mm

[Sell] Polycarbonate Sheets

[Sell] Flame Retardant BDP

[Sell] Plastics Handel

[Sell] Polycarbonate sheet Size: 0.3-1.5mm3feet6feet