Tradeindia.com - Sell leads in Polymers

[Sell] Hydroxypropyl Methyl Cellulose (HPMC)

Sat, 21 Nov 2009 17:13:00 +0530

Hydroxypropyl Methyl Cellulose (HPMC)

Specification Industrial grade
Appearance:white or similar white granules or powder
Methoxyl group: 19-24%
Hydroxyl propyl group:4-12%
Gel temperature : 60
PH value: 5.0-7.5
Viscosity2% solution20 5-100000mPa.s
Particle size 80-100mesh
Water content 5.0%
Ash content 1.5%

For more details please contact us.

[Sell] Polyurethane Springs

Thu, 12 Nov 2009 19:32:00 +0530

Polyurethane springs is the new wonder material which combines the strength of plastic & the elasticity of rubber. It eliminates the limitations of wire springs and rubber bushes. Wire springs have the tendency to break under high pressure and permanent set in a short time. It can sustain very high loads at higher hardness than rubber. Unlike rubber, It does not take part in weathering or chemical actions under normal conditions & does not disintegrate easily.

For more details, contact us.

[Sell] Ethylene Vinyl Acetate Copolymer Powder

Thu, 29 Oct 2009 10:08:00 +0530

We offer on regular basis EU origin Ethylene Vinyl Acetate Copolymer powder in bulk pack as well in 25 kgs pack, ideal for dry mortars, putties, paints, plasters, ceiling boards, coatings.

For more details please contact us.

[Sell] Polyimide Film

Mon, 19 Oct 2009 14:16:00 +0530

We could supply belows:
1.polyimide film with thickness:1mil,2mil,3mil,5mil,etc.,widely used in electrical and electronic industry.
2. fep polyimide film made of polyimide film coated by F46 on single side or double sides with thickness:0.0375mm-0.12mm,widely used in electromagnetic wire, high temperature-resisting wire for electrical insulation, and other fields needing PI self-sticking through heating.
3.polyimide film adhesive tape(kapton tape) made of polyimide film coated by acrylic or silicone adhesive on the side,widely used in electrical insulation and PCB's wave soldering industry.

For more details please contact us.

[Sell] Polymer

Thu, 15 Oct 2009 14:25:00 +0530

We are also importing Plastic Granules, agglomerates and grindings from abroad, which are drawn out during the reprocessing of PE Trims, Blocks, Shrink foils, Bags, Bottles etc.

The materials which are available with us are as follows :
a) LDPE - Low Density Polyethylene.
b) HDPE - High Density Polyethylene.
c) PP - Polypropylene.
d) HIPS - High Impact Polystrene.
e) EVA - Ethyl Vinyl Acetrate.
f) Colour Master Batches.

For any further information feel free to contact us.

[Sell] PASP

Wed, 07 Oct 2009 11:31:00 +0530

Sodium of Polyaspartic Acid (PASP)
CAS No.: 181828-06-835608-40-6
Molecular weight: 1000-5000

Molecular Formula: C4H6NO3(C4H5NO3M2)C4H6NO4

Structural Formula:

Properties:
PASP is a water soluble polymer. It is a green water treatment agent, with properties of non-phosphor, non-nitrogen, non-pollution and fully biodegradation. PASP has good scale inhibition on calcium carbonate, calcium sulfate, barium sulfate, calcium phosphate, etc.. Its scale inhibition rate for calcium carbonate is 100%. Moreover, PASP has dispersion and corrosion inhibition properties to metal equipment.

PASP is an alternative of phosphor-containing Water Treatment Chemicals, avoiding water system eutrophication and second pollution.

Specification:
items index
Appearance Amber transparent liquid
Solid content % 40.0 min
Density 20g/cm3 1.2 min
pH1 water solution 9.0-11.0

If you are interested,Please feel free to contact us.

[Sell] Hydrolyzed Polymaleic Anhydride (HPMA)

Thu, 01 Oct 2009 11:01:00 +0530

Hydrolyzed Polymaleic Anhydride (HPMA)

HPMA has good scale inhibition against carbonate and phosphate scales under temperature 300 with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement.

For more details please contact us.

[Sell] Super Absorbent Polymer (SAP)

Fri, 25 Sep 2009 16:21:00 +0530

Description: It is a kind of macromolecular material, non-toxic in granular form.
Uses: Mainly used in:-
a. For Sanitary napkins and Diapers.
b. For agriculture, Landscaping,Trnasplant and Transportation.
Packing: 25 kgs bag

For more details please contact us.

[Sell] Super Absorbent Polymer

Tue, 15 Sep 2009 12:25:00 +0530

SAP( Super Absorbent Polymer).
CAS No. 9033-79-8
SAP For Sanitary Napkins,SAP for Agriculture,Super Absorbent Polymer,SAP For Diaper, Macromolecul

Regarding SAP( Super Absorbent Polymer)for baby diapers and napkins,our product can match BASF product.

Typical value as follow for your reference,

appearance: white crystal.
Free absorbency of Distilled water:350~450 g/g
Free absorbency of saline solution: 45 min. g/g
Centrifugal Retention capacity: 30 ming/g
Absorbency under Load 0.3 psi,: 26 min.
Absorbency under Load 0.7 psi,: 20 min,
Absorption speed (by vorlex Method): 70 s max.
Moisture: 7.0% max.
Packing: in 20 kgs bags without pallet, 20 or 21mt in one 20'gp.

For more details please contact us.

HENAN KINGWAY CHEMICALS CO.,LTD.
Tel:86-371-65336567,
Fax:86-371-65336188

[Sell] Super Absorbent Polymer For Agriculture & Horticulture

Fri, 11 Sep 2009 15:01:00 +0530

We offer Super Absorbent Polymer For Agriculture & Horticulture.

The production of the agent plays an important role in the harvest of crops, vegetable and fruit, flower preservation, and urban horticulture, forest anti-drought, reduction of forage ecological degradation due to drought, desert vegetation protection, etc.

Features:
Excellent water holding capacity
Extend the effectivity of fertilizer and pesticide.
Improve soil condition
Non-toxic and odorless. Circular reusable.
Automatic degradation

Benefits:
Increased biomass production and better root growth
Savings in irrigation cost
Increased survival rate of seedlings
Direction for use
To be completely inflated at the first time use, then irrigate according to the soil conditions
Mix the plant Water-retaining Agent with soil completely.
Make sure that the agent is right at the root of plant directly.

For more details please please contact us.

[Sell] Adhesive Film

Fri, 04 Sep 2009 16:09:00 +0530

We offer you Adhesive Film.
It is to adhesion the plastic panel and aluminum panel in ACP production,which is the film made by special glue(high molecule)and multilayer PE films,the function of two sides of adhesion film are different, one side (smooth) is for the plastic panel and another side (frost) is for aluminum material characteristic cool usage. Select the imported brands DUPONT from USA,and SK from Korea as raw material.Use of foreign advanced technology to product the film.

1. Adhesion film has strong adhesion with good durability, which can be used to adhesive all kinds of PE, PP, NYLON, aluminum material and steel products.
Main usage: for ACP multilayer holder and AL-PE composite pipes.

Technical Characters:
Project Technical Parameters
Thickness 0.05-0.06mm+0.005mm 0.03-0.06+0.004mm
Width 1250~2050+3mm 1250~1600+3mm
The intensity of tensility 15Mpa 10Mpa
Ultimate elongation 300% 200%
The intensity of peeling off at the right angle 35N/mm 30N/mm
The intensity of peeling off at 180o 7N/mm 5N/mm

Please contact us.

[Sell] Poly Aluminum Chloride (Pac).

Sat, 29 Aug 2009 11:32:00 +0530

We are a large group company with turnover of 4 billion US dollars in 2008., and we are in charge of export of PAC made by our PAC manufacturer with capacity (Powder and Liq. form,annual production over 30,000 tons),As our products are of good quality,they are getting more and more popular in the world market.

Please kindly find the specifications as follows:

DESCRIPTIONS: POLY ALUMINUM CHLORIDE (PAC)

general chemical formula : [Al2(OH)nCl6-n]m
Appearance : Yellow Powder
SPECIFICATION: Al2O3 : 30% Min
Basicity(%) : 50-85
PH value : 3.5-5.0

WATER INSOLUBLE MATTER: 1% Max.
PACKING: 25 KG NET IN WOVEN BAG or Selected by Customers

We understand there is good PAC demand in your market, As a big PAC powder manufacturer, expect to establish business with you and your company

[Sell] Poly(Methyl Vinyl Ether-Alt-Maletic Anhydride)

Thu, 27 Aug 2009 17:32:00 +0530

We offer poly(methyl vinyl ether-alt-maletic anhydride).
Gantrez AN-119,139,149,169

Appearance: white powder

Molecular Formula: (C4H2O3C3H6O)n

Molecular weight: 468.41

CAS Number: 9011-16-9.

For more details, feel free to contact us.

[Sell] Nylon-6 Chips

Wed, 19 Aug 2009 15:16:00 +0530

We offer Nylon-6 Chips.

Uses:
1. For Industrial Yarn,Nylon Film & Engineering plastic use
2. For making fishing net and rope
3. For Tire cord yarn use only

For more details, feel free to contact us.

[Sell] Styrene Maleic Anhydride