Tradeindia.com - Sell leads in Adhesives

[Sell] Wooden Furniture Adhesive

Fri, 20 Nov 2009 16:52:00 +0530

We are offering quality wooden furniture adhesive at reasonable prices. It is used for pasting sun mica, teak ply etc. in Furniture industries. It is also used in Standard quality craft work industries, book binding industries, sports industries,etc. Our Product Quality remains same all the time.

For further details, feel free to contact us.

[Sell] Gums

Thu, 19 Nov 2009 17:00:00 +0530

We offer Gums which are widely used as Adhesive for films. It is available in Quantity/Packing of 50Kgs to 220 Kgs.

For any further information feel free to contact us.

[Sell] Nicbond Tile Adhesive

Mon, 16 Nov 2009 17:21:00 +0530

NIC-C1 Ceramic Tile Adhesive is a specially formulated cement-based adhesive for fixing ceramic floor and wall tiles on internal and external floors and walls.

It is used to fix porcelain tiles, marbles, natural granites, natural stones, travertine,pool tiles and pieces, and non-slip tiles of middle sized (up to 60x60cm size for the wall and any size for the floor).

For more details please contact us.

[Sell] Greenseal MWR 40

Sat, 14 Nov 2009 16:38:00 +0530

Greenseal MWR 40 is a water-Dilutable Potassium Methyl Suliconate used for imparting a colourless water repellent surface finish to building material without significantly reducing water vapour permeability. It is also used to provide barrier against rising damp and the treatment remains effective for 10 to 20 years.

In addition, treatment with Green seal MWR 40 prevents efflorescence of salts and makes Dearing of the tiled floor easier.

Its usage versatility ranges from making manufactured and natural stones, aerated concrete, low-fired clay products and plastered surface water repellent to surface treatment for concrete and damp proofing building ground. it is specially apply on wall to prevent stains and inks from entering the wall and granite.

Please mail us, for your requirement.

[Sell] Double - Sided Adhesive

Wed, 28 Oct 2009 10:48:00 +0530

We offer Double - sided Adhesive of using to make lenticular product, It adopt best gelatinizing product-line, super clear good-plastering, formal and best quality. Many 3D-manufacturers very like it. Its standard is 1.52*37m, 1.27*37m, 1.07*37m, 0.914*37m and 0.635*37m. We welcome you make to order other size.

For more details please contact us.

[Sell] Thomas Electromagnetic Shielding Adhesive

Fri, 23 Oct 2009 10:52:00 +0530

Product name: Electromagnetic shielding high temperature resistant adhesives THO4067.

Outline: It is modified epoxy adhesive. It is easy and convenient to use for it solidifies fast at normal temperature and bonds well., No bubbles appear after curing thus making the surface smooth and bright. The series has two categories, room temperature curing and heat curing. Its liquidity, color and heat-resistance quality are adjustable.

Applications: It applies to the self-bonding and mutual-bonding of metal, ceramics and composite materials in high temperature conditions in the fields of aviation, aerospace equipment telecommunication equipment and microwave products. And it also applies to the bonding, filling, sealing and repairing of heated parts of microwave products chips.

Features:
* The A component is pasty, non-solid particle. The B component is in tinted paste shape.
* Being durable and resistant to ultraviolet light, once the bond has formed.
* Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.
* Mix the two components in a certain proportion, apply it to the surface of the substrates acquiring no strict treatment, which makes it so convenient to use.

You'll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes. Non-toxic after solidification, though it is a little smelly. Being stable, its storage time is one year.

The main technical parameters are as follows:
Microwave penetration resistance: 50MHZ 2450MHZ
Volume resistance: 11015.cm
Sheet resistance: 2.51015
Voltage withstand: 20-24kV/mm
Hardness shore D 90
Water absorbing capacity: 24h0.1%
Vitrification point: 90-100
Cementation intensity:
Normal temperature:
Tensile strength: 35MPa;(steel)
Shearing strength: 25 MPa(steel)
At 150: Tensile strength: 45.5 MPa

Feel free to contact us.

[Sell] Adhesive Tapes

Thu, 15 Oct 2009 11:29:00 +0530

Product Name : Adhesive tapes

Model No : PTFE Adhesive tapes
Origin : china
Packing : clients request
Brand Name : eago
Delivery Time : 7-30days
Minimum Order : 500pcs
Supply Ability: 10000000pcs

Quality System Certification: ISO9001,ISO14000

Please mail us for requirement.

[Sell] Marble Adhesive

Thu, 08 Oct 2009 12:09:00 +0530

Marble Adhesive : It can be used for fast fixing, bonding and repairing the cracks and holes of all kinds of stone, granite, ceramics pattern making and so on.

Marble glue is composed of polyester resin, filler, thickening agent, and hardener. It is semisolid. Unsaturated resin has very good adhesion, strong viscosity and rigidity. Hardener is peroxide in cream shape. Even if under the low temperature(<5),it is very easy to harden. As a result of using the integral amidogen in to unsaturated resin, this kind of adhesive have the good stability, it is easy to store.

Shelf life: 12 months
Direction:
1. Mix the marble glue and hardener. The mixing standard should be 100 parts glue with 1-3 parts hardener. Drying time: 3-8 minutes, it depends on the temperature and the proportion of hardener. The hardener should be added less in summer and more in winter.

2. The surface of bonding object should be clean and dry.
3. After 24 hours, it will reach final intensity.

Storage:The glue should be stored as its own shape. The guarantee
time will be 12 months if it is put in cool, dry and
ventilated places with cover sealed.(Normal temperature:25 degree)

Coverage:500g/square meter. According to the application situation.

Please mail us, for your requirement.

[Sell] Contact Adhesive

Thu, 08 Oct 2009 12:07:00 +0530

Contact cement is neoprene-based glue.

Neoprene rubber adhesive is a multi-purpose contact adhesive with strong bonding ability. It is made with latest technology and equipment, it has super viscosity and long service life. It is suitable for industries such as architectural decoration, furniture manufacture, automobile, packing, advertising, shoes, textile, toy and home decoration. It can be widely used for both hard-to -contact materials like fireproof plate, aluminum-plastic plate and PVC board and common board like wood board, plywood, floorboard, furniture, wallpaper, polyester plywood, bamboo board, asbestos board, carpet, rubber, etc.

It can be used by brush, roller coater, notched trowel, air spray(hot or cold),airless spray(hot or cold),curtain coater and so on.
Drying time: 5-25 minutes(25 degree)
Shelf life: 18 months

Features:

1) Good protective properties after hardening: anti petrol, anti acid
and alkaline, impact resistant. Effectively prolongs service life
of contacted objects.

2) Extra heat and cold resistant after hardening: endurable when
temperature is between -50 degree to 100 degree.

For more details, please contact us.

[Sell] DF201 PU-Foam

Mon, 05 Oct 2009 14:35:00 +0530

DF201 PU-Foam is used for sealing fixing and adhering the gap bubble sealant for windows and doors, wooden planks around the walls of the sealing, insulation, water pipes, vents, wires exports sealing, insulation, moisture-proof insulation.. The product also has a feature in fixed, installation, noise, dust, gas separation, to fill vacancies in the structure, engineering hole etc.

For more details, please contact us.

[Sell] Polyurethane Sealant

Mon, 05 Oct 2009 14:32:00 +0530

One-Component Polyurethane Foam Sealant:

Notice:

1.Avoid direct sunlight and do not store the product in places with temperatures below 45.

2. Use in well-ventilated area. Please keep far away from fireworks.

3. Please wash with water repeatedly when touching the skin by accident,If eyes,please deal with in the same way,and then see a doctor.

4. Keep out of reach of children.Do not burn or pierce.

5. During transportation and loading,please avoid throwing, inversion, sideways puts, sharp bumps and collisions.

6. Do not store sideways,in order to avoiding valve adhesion. Please do not store in the moist environment, in order to avoid accident caused corrosion.

For more details, please contact us.

[Sell] Dispersion Adhesives

Sat, 26 Sep 2009 18:37:00 +0530

Water-based Dispersion Adhesives are based on natural and synthetic rubber and vinyl acetate copolymers. Our Water-Based Adhesives are formulated to be Environmentally Friendly and meet specific application requirements for Color, Tak, Set Speed, Bond Strength, Lay-Flat properties, Heat Resistance and other performance standards.

For more details, contact us.

[Sell] Solvent-Based Adhesives

Sat, 26 Sep 2009 14:41:00 +0530

Solvent-based Adhesives offered by us are largely determined by the polymer system in the formulation. The choice of adhesive type depends on the specific substrates and environmental resistance needed temperature resistance, oil and plasticized resistance, etc. Most solvent based adhesives contain flammable solvents which require proper precautions for safe handling. remain soluble in organic solvent after drying. This reduces the need for equipment maintenance and facilitates clean-up.

For more details, contact us.

[Sell] Hot Melt Adhesive

Sat, 26 Sep 2009 14:40:00 +0530

Hot Melt Adhesive offered by us are solvent, thermoplastic and 100% solid at room temperature. By the process of simple cooling it achieves solid state, as compared to other adhesives, which attain the same results through the process of evaporation or removal of the solvents. However, at high temperatures they become a low viscosity fluid with excellent adhesive properties. The usual operating temperature hot melt adhesives are in the range of 175 to 205C. The various shapes available are: powder Of Various Mesh Sizes, pellets, Chips, Granules, Pillows, Films, Glue Sticks, Crushed, irregular Sizes, Slats & Cubes Of Various Sizes and trays.

For more details, contact us.

[Sell] Membrane Adhesives

Sat, 26 Sep 2009 14:40:00 +0530

Membrane Adhesives are designed for bonding all Membranes to metal, wood, concrete and certain insulation boards. These should be used to adhere wall flashing and other vertical surface details. These has no slope limitations. It is easily spread, has good tack and dries to an elastomer bond. These must be applied to substrate and underside of membrane sheet.

For more details, contact us.

[Sell] Reactive Hot Melt Adhesives

Sat, 26 Sep 2009 14:40:00 +0530

Reactive Hot Melt Adhesives is based on polyurethane(PUR) is pure solid without solvent.

Salient Feature: It will become into liquid after heating, then adhere between the both kinds of material. It will highly improved the performance of firm adhesion, heat resistance, cold temperature resistance and etc.

The PUR hot melt adhesive is widely used for various industries because of its high reactivity, such as foamed plastic, ceramic, wood, textile texture, stainless steel, aluminum, metal foil, leather and rubber etc.

It can reach quite high inner polymerization strength, also, it's property also can be adjusted from flexible and tough and hard per different requirements.

For more details, contact us.

[Sell] long-term supply polyurethane foam

Wed, 23 Sep 2009 00:00:00 +0530

Construction tempertature The suitable temperature is 10～30℃, the optimum temperature is 20～25℃, the relative humidity is 40～65%. Please preheat it in the warm water constantly for a while when the temperature is below 10℃(except the sample of ultra-low temperature prescription
Surface Condition of the basing material Adhesive firm without oil,dust and ester on the surface of the base material, and reach to the best effect of expanding with full moisture.

[Sell] DF202 gun-type polyurethane foam

Wed, 23 Sep 2009 00:00:00 +0530

Automatic adhesion Needless processing of the surface, having good adhesion between the most of base materials, particularly the wet surface
Humidity cure The foam are reacting with the air or the moisture of the building materials promptly when jet, so it is unnecessary to add the curing agent or others.

[Sell] polyurethane foam sealant

Tue, 22 Sep 2009 00:00:00 +0530

one-component polyurethane foam is a kind of one-component polyurethane foams, which is solidified by the moisture in the air. It is adopted by European advanced technology, plus carefully-chosen raw material and unique producing method, all of which make our PU foam to be stable, strong, hermetic and high-quality.

[Sell] DF201 one-componet polyurethane foam sealant

Fri, 18 Sep 2009 00:00:00 +0530

One-component polyurethane foam tube sealant sealant is a kind of one-component polyurethane foams, which is solidified by the moisture in the air. It is adopted by European advanced technology, plus carefully-chosen raw material and unique producing method, all of which make our PU foam to be stable, strong, hermetic and high-quality.