Tradeindia.com - Sell leads in Scaffolding

[Sell] Scaffoding Adjustable Aligner

Sat, 21 Nov 2009 16:21:00 +0530

Scaffoding Adjustable Aligner
Material: Q235
Finish: painted

For more details please contact us.

[Sell] Ring-Lock System Scaffod

Sat, 21 Nov 2009 16:12:00 +0530

The Ring lock system scaffold can be used in

1. Support of the moulding board in construction;

2. Scaffold for the wall of buildings,and ship industry;

3. Quick erection of proscenium and stand;

4. The moveable work shed;

5. Different size shelf.

For more details, please feel free to contact us.

[Sell] Ledgers Horizontals

Thu, 12 Nov 2009 17:03:00 +0530

Ledgers horizontal are basically used in cuplock system.

We offer our range of Horizontal Ledgers in varied sizes and capacities to meet various requirements of clients. These ledgers have simple and robust design therefore no maintenance is required.

For any further information please contact us.

[Sell] Cuplock System

Thu, 12 Nov 2009 17:03:00 +0530

Cuplock System:

This is a multi purpose system which is used for plastering, supporting structures, for lift machines (Hoist) etc. This systems has horizontal and vertical members by cups provided on it. The cups on the vertical member are of malleable cast iron and pipes used are of 40 NB pipe, forged blades are welded on both corners.

Please contact us for more details.

[Sell] Vertical & Standard Cup Locks

Thu, 12 Nov 2009 17:02:00 +0530

Vertical & Standard Cup Locks:

Verticals are available to suit any propping or access application economically. The connection point is set at 500 / 1000 mm vertical intervals for maximum venatility in use. The lower cups are welded in position, the upper removable cups are retained by a fixed stop. The verticals are drilled for the fixing of SPIGOT joint. A bolt can be used to restrain upward forces if required. These are available in different sizes 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000mm or as required.

Please feel free to contact us.

[Sell] Scaffolding Ledgers

Thu, 12 Nov 2009 09:56:00 +0530

Scaffolding ledgers are the horizontal tubes which connect to the scaffolding standards or uprights. Scaffolding ledgers are an important because they add stability to the scaffold. Scaffolding ledgers are also needed because the scaffolding transoms are placed on these which allow scaffolding planks to be used.

Please feel free to contact us.

[Sell] Couplers

Sat, 07 Nov 2009 12:10:00 +0530

We offer all kinds of couplers & accessories.
Used in Framework in construction work.
With Best Quality & Prices.

For more details please contact us.

[Sell] Slab Forms

Wed, 04 Nov 2009 15:48:00 +0530

We are also into manufacturing floor and slab forms which hold use in varied industries. They are manufactured with optimum quality mild steel. These are also made in different sizes as per the specifications of the clients. Adjusters are also made to fill up odd floor and slab forms.They are available with the following specifications:

* Its pressed out sheet having thickness of 2 / 2.25
* Sizes available
o 1150 x 600
o 900 x 600
o 1150 x 300
o 900 x 300
* Angle Parts
* Fabricated from 2/1.6 mm thick sheet & 30/35/25 x 30/35/25 x 5/4/3 mm angle
* Beam sides available in 230 x 2500 mm.

Please feel free to contact us.

[Sell] Wall Form Systems

Wed, 04 Nov 2009 11:12:00 +0530

We also manufacture VEPL Wall Form Systems and accessories. These are used in a wide array of industries. The manufacturing process mainly uses mild steel, which adds stiffness to the flat top sheet.

Our wall form systems plates are fabricated with the following specifications.

45 x 45 x 5 mm slotted angles.
50 mm c/c holes.
2.5 mm thick HRC.
100 x 2500 mm height of soldering of same type of material.

Please contact us for more details.

[Sell] Precision Engineered Cup Lock

Wed, 04 Nov 2009 11:11:00 +0530

We offer precision engineered cup lock, used in building and construction industries. These are multipurpose scaffolding system which can be used for oil forms of access and support structures in the building and construction industries. Vertical cup locks are also available, to suit propping and access applications economically. The connection points are made at 500/100 mm of vertical intervals for maximum utility. The lower cups are welded in position and the upper movable cups are retained by fixing it. The verticals are drilled for the fixing of spigot joint. To restrain the upward forces a bolt can be used if required. These are available in different sizes ranging from 3000 mm, 2500 mm, 2000 mm, and 1500 mm to 1000 mm depending on the requirement of the customers. Our cup lock is successful as they lie in the node point of fastening method. The horizontal can be fastened at one time making a rigid connection. The horizontals bear directly on the verticals and are firmly clamped by the action of the cup with no loose parts. The rigid node point allows high horizontal load experience with a 57kN leg load. This is a multipurpose system which is used for supporting structures, for lift machines (hoists) etc. This system has horizontal and vertical members. Horizontal members are locked to vertical members by cups provided on it; the forged blades are welded on both corners. The cups on the vertical member are of malleable cast iron and pipes used are of 40 mm dia pipe.

Please feel free to contact us.

[Sell] Adjustable Jacks

Tue, 03 Nov 2009 16:13:00 +0530

Adjustable Jacks:

Our expertise also includes adjustable base/ stirrup head jacks for varied industrial use. These are made adjustable to increase its utility. A method of adjustment is provided either at the top or at the bottom of a scaffold support structure. It is in conjunction with foreheads and adapter and can accept the full loading capacity of the cup lock when fully braced. The base plate size 150 x 150 x 6is available in the following specifications

* 32 mm diameter solid rod, 225 mm adjustment, 350 mm total length
* 36 mm diameter solid rod, 350 adjustment, 240 mm total length U head plate size 100 x 100 x 100 x 6 is available with the following specification
* 32 mm diameter solid rod, 225 mm adjustment, 350 mm total length

36 mm diameter solid rod, 350 adjustment, 450 mm total length adjustable base jacks are available with the following specifications.

Please feel free to contact us.

[Sell] Steel Prop

Tue, 03 Nov 2009 14:13:00 +0530

Max length:

500mm, 600mm, 700mm, 750mm, 800mm/as clients demand

Tube material:
seamless steel tube(20#) / welded steel tube(Q235).

Tube diameter: 25-50mm.

Base plate:
120*120*4.0mm, 120*120*4.5mm, 120*120*5.0mm, 150*150*4.0-6.0mm(flower type)

Surface: painted, powder coated, cold galvanised, hot dipped galvanised.

[Sell] Scaffolding Clamp

Tue, 03 Nov 2009 13:33:00 +0530

Size : 48.6 mm or others

Surface treatment : yellow zinc plated

Kind swivel coupler, Fixed coupler, Single Coupler, Double coupler.

For more details, please contact.

[Sell] Frame

Tue, 03 Nov 2009 12:49:00 +0530

Walk through frame scaffolding has been specially designed for fast and easy assembly by unskilled operators, coupled with the minimum of supervision.

For more details, please contact.

[Sell] Cross Braces

Tue, 03 Nov 2009 10:02:00 +0530

Cross Braces:

Cross bracings are door-like scaffolding important accessories used to join two H-frames together in transverse. These are manufactured with 30 mm NB.

These are available in different sizes:

2.5 meters
2.0 meters
1.5 meters
1.0 meters

Please feel free to contact us.

[Sell] Adjustable Base Head Jacks

Tue, 03 Nov 2009 10:01:00 +0530

Our expertise also includes adjustable base/ stirrup head jacks for various industrial use. These are made adjustable to increase its utility. A method of adjustment is provided either at the top or at the bottom of a scaffold support structure. It is in conjunction with foreheads and adapter and can accept the full loading capacity of the cup lock when fully braced.
Features

The base plate size 150 x 150 x 6 is available in the following specifications:

* 32 mm diameter solid rod, 225 mm adjustment, 350 mm total length
* 36 mm diameter solid rod, 350 mm adjustment, 240 mm total length

Up head plate size 100 x 100 x 100 x 6 is available with the following specification:

* 32 mm diameter solid rod, 225 mm adjustment, 350 mm total length
* 36 mm diameter solid rod, 350 mm adjustment, 450 mm total length

Adjustable base jacks

(Pipe OD 38 mm)
TL/AL (Mtr.) (Solid D 32 mm)
TL/AL (Mtr.)
0.450/0.350 0.500/0.400
0.550/0.450 0.600/0.500
0.650/0.550 0.800/0.700
0.750/0.650 1.000/0.800

Kindly contact us for more details.

[Sell] H - Frames

Mon, 02 Nov 2009 16:50:00 +0530

H - Frames consist of welded frames with 48.3 mm O.D. verticals braced together with scissor type cross braces.

Excellent rigidity due to welded construction and cross bracing. No loose fittings. No tools required and quick & easy for erection. Ideal as accesses scaffolding and support staging for heavy structures, high slab, bridge griders etc. Frames are available in various sizes to meet your requirements.

Standard Sizes:

2000 x 1250 mm
1500 x 1250 mm
1000 x 1250 mm

Please contact us for more details.

[Sell] Adjustable Telescopic Spans

Mon, 02 Nov 2009 14:27:00 +0530

Our range of products also includes adjustable telescopic spans. These are used in various industries. Sheets and lattices of 10 mm diameter are used for making of these adjustable telescopic spans. Bars and SF 65 x 65 x 6 mm are also used in this. An additional angle stiffener is welded to the sheet bearing with an appropriate angle, two eye bolts are also attached to it. These telescopic spans are made adjustable for its easy and simplified use.

Features:

* These are made of M.S. steels.
* The assembly consists of inner span, outer span and nut bolt arrangement.
* Inner span consists of M.S. box (internally bended), T angle bar, L angle and steel round bar welded to M.S. box and T angle.
* Outer span consists of M.S. box (externally bended), 4 flat bars (small), a long flat bar, L angle and steel round bar welded to M.S. box and flat bar.
* Holes are made on outer span in which nut and bolt is used to fix both the spans at any distance as per the requirement.

Range limits of telescopic spans:

Span size Range Min. (Mtr.) Range Max. (Mtr.)
ESO+ESI 1.75 2.70
ESO+SI 2.35 3.40
SO-ESI 2.40 3.45
SO+SI 2.46 4.15
SO+LI 3.05 4.75
LO+SI 3.15 4.90
LO+LI 3.15 5.50

Accessories:

Eye Nut-Bolt

Spacing Table

Allowable span for center line spacing

Slab thickness 300 mm 600 mm 900 mm 1150 mm
100 8000 5630 4600 4000
115 7800 5500 4450 3850
125 7550 5300 4300 3750
150 7100 5000 4050 3550
180 6700 4750 3850 3350
200 6400 4500 3650 3200
250 5900 4100 3350 2800
300 5450 3700 3150 2450

Please contact us for more details.

[Sell] Adjustable Steel Props

Sat, 31 Oct 2009 15:53:00 +0530

VENTISYS manufactures adjustable steel props. We provide an ideal and economical method of support for all kinds of infrastructure needs like slabs, beams, walls and columns. Props have a wide variety of applications in general building construction and repair work. A prop speeds up projects reducing completion time & safe to labour.

Features

These are made of M.S., H.R., C.R. steels.
The total assembly consists of inner prop, outer prop, locking, locking nut and flat plates.
Inner tube is of 40 mm ID and 48.3 mm OD.
Outer tube is of 50 mm ID and 60.3 mm OD.
Holes of 14 mm diameter are made in inner prop at a constant distance of 150 mm.
Outer prop is threaded from top up to 300 mm.
Inner tube is free to move telescopically inside outer prop. It can be fixed at any distance as per requirement with the help of slots.
The high tensile locking pin is located through a slot in the outer section and a hole on the inner section for coarse adjustment.
A self cleaning device on the collar nut, which automatically clears the thread of concrete, and dirt where the nut is rotated.
Base plates and head plates are holed for use with slab form work.
TPI ACME square thread ensure load bearing strength at this critical point.
Beam type of U head props are customer's requirement.
Inner tube is braced in both directions.

[Sell] Cuplock Scaffolding

Fri, 30 Oct 2009 18:20:00 +0530

The leading scaffolding arrangement worldwide cuplocks unique node point connection makes it the fastest, safest and most versatile scaffolding ever designed.

For any further information feel free to contact us.