Tradeindia.com - Sell leads in Heaters

[Sell] electric cigarette

Thu, 05 Nov 2009 00:00:00 +0530

offer electric cigarette with CE ROHS APPROVED

[Sell] Gas Heaters For Corrugation Machine

Wed, 04 Nov 2009 15:05:00 +0530

Gas Heaters For Corrugation Machine with rich technical expertise, we are able to offer a wide range of electrical corrugation machinery heaters. Our heaters are insulated with magnesium oxide and have technologically advanced features and assure quality as well as superior performance. The heater includes a curved metal plate where channels are drilled through end faces of the plate. Slots are provided at the end faces of the plate to interconnect pairs of adjacent channels at alternate ends to form a serpentine steam passage through the plate. These can also withstand high temperature owing to the use of superior grade raw material in their production.

Corrugation Plant Heaters are used in paper corrugation Industry. Size available from 26in to 92in & also available in 8.2mm & 10.5 mm Dia in 304G Stainless Steel

Corrugation Machine:

This one of the three heaters for heating the three rollers of paper corrugation Machines. Each heater consists of 9nos heating rods in star connected for three phase supply, each heater rod easily replaceable. These heaters are available in different ratings depending upon the size of machine as per chart given below.

Heaters upto 12KW rating are available in 11.2MM O.D. special type of heaters in economic range commonly none as step heaters (in 2 or 3 steps) as required according the width of paper to heat roller length.

Availability:

Machine Sizes KW

32"M/C UP TO 7 KW

42"M/C UP TO 9 KW

45"M/C UP TO 9 KW

52"M/C UP TO 12 KW

62"M/C UP TO 15 KW

65"M/C UP TO 15 KW

72"M/C UP TO 18 KW

82"M/C UP TO 18 KW

Please feel free to contact us.

[Sell] PTC Ceramic Heater

Fri, 30 Oct 2009 10:40:00 +0530

We offer PTC Ceramic Heater with the following specification:

= 2 heating Power : 750/1500W
= Cool / Warm / Hot wind for selection
= Adjustable thermostat control
= Overheat protection
= 90 degree oscillating
= Safety tip-over switch
= Power indicator light

G.W.(kg) : 1.8
N.W.(kg) : 1.2
Carton(mm) : 200*170*310
2040PCS/20'
4200PCS/40'
4920PCS/40'HQ

Please contact us, for your requirement.

[Sell] Carbon Heater

Fri, 30 Oct 2009 10:38:00 +0530

NSKT-90B Carbon Heater:

= Two carbon fibre tubes
= Max Power : 1000W, Low and high two heating power setting
= Width angle oscillation
= Instant heat accompanied by not dazzling light
= High efficiency,energy-saving
= Safety tip-over switch
= Safety mesh grill
= High temperature-resistant plastic housing,cool touch cabinet
= Integral carry handle

G.W.(kg) : 2.85
N.W.(kg) : 2.25
MEAS(mm) : 345*165*635
820PCS/20'
1660PCS/40'
1900PCS/40'HQ

Please contact us, for your requirement.

[Sell] Quartz Heater-NSKT-120Q

Fri, 30 Oct 2009 10:36:00 +0530

Quartz Heater-NSKT-120Q

Heating unit 600W 230V,
Heating by Quartz tube
Total power 1800W
CR.NI.plated grid,
Bright ALU.
Reflector
Safety tip-over switch

G.W.(kg) : 1.25
N.W.(kg) : 1.00
Carton(mm) : 540*135*262
Loading quantity:
Use trapezia-carton 4300PCS/40'HQ
Use rectangle-carton 3500PCS/40'HQ

For more details, please contact us.

[Sell] Halogen Heater

Fri, 30 Oct 2009 10:29:00 +0530

Product name : Halogen Heater NSKT-120B

Features:

= Halogen elements, Three heat setting:400W/800W/1200W

= Instant heat accompanied by a cosy glowing light

= High efficiency,energy-saving

= Safety tip-over switch, Safety mesh grill

= High temperature-resistant plastic housing,cool touch cabinet

= Wide-angle oscillating function,total silent running

= Integral carry handle

G.W.(kg): 3.40
N.W.(kg): 2.80
MEAS(mm): 380*178*625 700PCS/20' 1450PCS/40' 1700PCS/40'HQ

Please mail us, for requirement.

[Sell] Quartz Heater

Fri, 30 Oct 2009 10:29:00 +0530

Quartz Heater NSKT-80C we offer with the following features:

= Two heat setting:400W/800W
= Quartz heating element
= Safety switch built in cut off device if knocked-over
= Economical and energy saving
= Base can be fold

G.W.(kg):1.20
N.W.(kg):1.00
Carton(mm): 270*110*410
2300PCS/20'
4850PCS/40'
5700PCS/40'HQ

For more details, please contact us.

[Sell] Infrared Carbon Heater

Fri, 30 Oct 2009 10:26:00 +0530

Model No. NSKT-90-1

Two carbon fibre tubes, Max Power:1200W,low and high two heating power setting.

Width angle oscillation, Instant heat accompanied by not dazzling light.

High efficiency,energy-saving, Safety tip-over switch.

Safety mesh grill, High temperature-resistant plastic housing,cool touch cabinet.

Can vertically and horizontally use, Integral carry handle

G.W.(kg): 4.00
N.W.(kg): 2.75
MEAS(mm): 332*332*720
370PCS/20'
720PCS/40'
850PCS/40'HQ

For more details, please contact us.

[Sell] Electric Water Heater

Mon, 26 Oct 2009 13:13:00 +0530

Electric Water Heater available with us are available in the different capacity, model as per requirement of client. Our range of water heaters are designed in accordance to the market standards and consume less power. The water heater offered by us ensure outstanding performance and are available at competitive prices.

For more details, contact us.

[Sell] Electric Room Heater

Mon, 26 Oct 2009 13:13:00 +0530

Our range of electric Room Heater are known for providing warm and comfortable interiors. These high quality room heaters are made of heavy gauge body & have solid tubular element with insulation and temperature control that provides in them optimum performance. Some of salient feature are as: High performance, less consume of electricity, high efficiency and cost effective prices.

For more details, contact us.

[Sell] Oil Filled Heaters

Sat, 24 Oct 2009 16:24:00 +0530

Oil Filled Heaters are safe, user friendly and small in size. Oil filled heaters are build up of heavy-gauge steel with rest free enamel finish. There is no need to replace or refill the oil in portable electric heaters. IT can maintain desired temperature. IT can be transported from one room to other room easily. Oil Filled Heaters has heavy duty power cord, concealed heating element. Thus it provides comfort to user by its great features.

For more details, contact us.

[Sell] Room Heaters

Sat, 24 Oct 2009 14:57:00 +0530

Room Heaters is electronic equipment that converts electric charge in heat. The heating element inside it is an electrical resistor and it works on principle of heating in which electric waves go through a resistor which converts electrical power into heat. Resisters may be composed of metal-alloy wire, non metallic carbon compounds, or printed circuits. Heating elements may have exposed resister coil mounted on insulators, metallic resister embedded in refractory insulation and rapped in protective metal, or a printed circuit rapped in glass.

For more details, contact us.

[Sell] Patio Gas Heater

Sat, 24 Oct 2009 14:56:00 +0530

Patio Gas Heater is a heater that can work in open air also to warm you up. It can work in 15 20 foot area in open air and increase the temperature by 10 to 25 degree Fahrenheit. Outdoor patio heater is used in restaurants, pubs, hotels etc. It is useful for smokers in winter. They can go outside for smoking in restaurants or pubs etc. Thats why persons like to go in those pubs that are using outdoor gas heaters.

For more details, contact us.

[Sell] Drum Heaters

Thu, 22 Oct 2009 10:07:00 +0530

We have in store the Heaters which will not only have the prolonged life span but will also save your power bills be it for the Drum Heaters or the packaging machine heaters. We welcome your enquiries.

Please feel free to contact us.

[Sell] Gas Heater

Tue, 13 Oct 2009 14:24:00 +0530

Product Details:

* Minimum electricity output:2000w
* Piezo-electric ignition;
* First-class infrared burner with high quality ceramic plates;
* Easy operation, convenient and comfortable;

For more details, please contact us.

[Sell] Electric Outflow Heaters

Wed, 07 Oct 2009 10:19:00 +0530

Electric Outflow Heaters:

Two types of oil outflow heaters are manufactured.
(a) Electric (b) Electric plus Steam / Hot Water

Heater consist of a mild steel vessel having a flanged body for bolting directly to the wall of storage tanks. A flanged outlet is fitted to heaters as standard and an oil return may also be fitted. The outlet being on the right-hand side as shown in the drawing. Heater shrouds are vented to prevent air pockets.

(a) Electric Oil Outflow Heaters are fitted with unbreakable withdrawable type elements having terminals and busbars enclosed in a terminal box. Flameproof terminal enclosures may also be fitted.

(b) Electric plus Steam / Hot Water Heaters are fitted with mild steel heating coils with screwed BSP flow and return connections.

Please feel free to contact us.

[Sell] Coil Heaters

Mon, 05 Oct 2009 17:24:00 +0530

Features:

Standard sizes available with various cross section
Various Watt Density option available
Designed for even heat profile
Precision fit on Hot Runner Nozzles
Highly Non-corrosive
Choice of Terminal Exits
Advanced Thermal Engineering
Available with in built Thermocouple
Maximum heat transfer due to more contact area

Applications:

Hot Runner Nozzles & Bushings
Tube Extrusion
Pipe Forming

[Sell] Micro Tubular Heaters

Mon, 05 Oct 2009 17:22:00 +0530

Specifications:

Axial Clamp - Front end loading / adjusting saves hours of downtime in moulds.
two standard diameters, 1.5 mm and 1.8mm (0.059 & 0.07)
External J or K type T/c Available
Equipped with a special cover for easy fitment over circular parts.
Faster Heat Transfer with flat cross section tube (1.40mm x 2.20mm)
Staggered cold leads of 5 & 7
Standard sizes available
Robust Construction in Micro Tube Dia 1.50 & 1.80mm
Standard wattage available 149 watt & 269 watt
Standard size available ID 19mm * 30 & ID 22mm * 30
Applications:
PET Preformed Moulds
Hot Runner Nozzles & Bushings
Thin Walled Container Moulds

[Sell] Cartridge Heaters

Mon, 05 Oct 2009 17:22:00 +0530

Features:

Min Dai -6 Max Dia -20
Min length-40mm , Max length 500mm
Available with in built Thermocouple
Highly Non-corrosive
Various Watt Density option available
Even heat profile & Max temp up to 750 c
Specially selected High Purity Magnesium Oxide
Standard Sizes Available
Superior Life Expectancy
Bottom End Welded with Disc Washer
Choice of terminal exists

Applications:

Packaging Industry
Hot Runner Bushings
Marking & Sealing Machinery
Medical & Laboratory Apparatus
Shoe Making Industry
Die and platents

[Sell] High Performance Nozzle Heaters

Mon, 05 Oct 2009 17:22:00 +0530

Specifications:

Higher Operating Temperature 400C
Available with built in Thermocouple
Negligible Effect of Material Spillage
Very Robust Design
Delivers Better & Even Heat Transfer
Available with built in Thermocouple
Good for processing engineering plastics( nylon66, glass polyfill)

Applications:

Extended Nozzles
Injection & Blow Moulding

Advantages:

Quick ramp up of temperature due to higher watt density
Negligible effect of material spillage
Efficient heat transfer due to inner Brass Collet
Accurate Temperature Control at the nozzle tip
Higher operating temperature (400C max) compared to conventional Mica Band Heaters (250C max)