Tradeindia.com - Sell leads in Electro Magnets

[Sell] Iron Core

Fri, 25 May 2012 10:58:00 +0530

The iron core made of Fe-based amorphous using a special process can be used on the intermediate frequency transformers of various sizes in the frequency range from 400Hz ~ 15 KHz. The iron core of the intermediate frequency transformer mainly includes two categories of rectangular and circular. All of the iron cores are equipped with metal, bakelite or plastic protection case. Users can also provide protection case by themselves.

Application areas:

Air Transformer

Railway control system transformer

Mechanical parts quenching equipment transformer

Laser Power Transformer
Inverter Power Supply Transformer

Features:

High saturation magnetic flux density can increase the operating points of the transformer, reduce power supply volume.

High permeability, low coercivity, low loss can improve the power efficiency.

It can work for a long time at the temperature of -55 ~ 130 , with good stability.

[Sell] Ring Iron Core

Thu, 24 May 2012 15:49:00 +0530

The ring iron core used for switching power supply is made of nano-crystalline alloy, which has a high permeability and low loss and is an ideal material used to make the main transformers, magnetic amplifier, choke circle, energy storage inductors, filter inductors, common mode inductance, the peak suppressor in single-ended, and push-pull or full-bridge high frequency switching power supply as well.

Features:
1. High saturation magnetic flux density can effectively reduce the size of the transformer.

2. High permeability and low coercivity can improve the efficiency of the transformer and reduce the magnetizing power and distribution parameters of the coil.

3. Featuring with low loss and low magnetostriction coefficient

[Sell] DC-CT Transformer Core

Thu, 24 May 2012 14:06:00 +0530

Anti-DC transformer cores as a combination of core components, used in electrical degree / watt-hour meter, power measuring systems.

Features of the core:
1. Strong anti-DC-capacity;
2. Precision, the scope of application of 0.5-0.1 grade level, the scope of application of current 1.5-200A;
3. Excellent high and low temperature properties;
4. A high price.

[Sell] Current Transformer Iron Core

Thu, 24 May 2012 14:05:00 +0530

Measuring-level current transformer used in power system, transformer used on precision measuring instruments (such as watt-hour meter).

According to the requirements of different measurement accuracy of the transformer, different soft magnetic materials can be chosen as iron core materials. The higher the permeability of the iron core is, the smaller the measurement error of the transformer is, hence the accuracy is higher. At present, the most common iron core material is cold-rolled silicon steel sheet, followed by Permalloy and nano-crystalline glass alloy.

In recent years, demands for transformers with high-precision level (such as class 0.2, class 0.2Sand class0.5S) increased rapidly. When small ratio, low ampere turns are required or the iron core is restricted because of the small volume, the cold-rolled silicon steel often fails to meet the accuracy requirements. Although the Permalloy iron cores with high permeability can meet the required precision, its price is very high.

However use of nano-crystalline alloy iron cores can both meet the accuracy requirements and be produced at lower cost than the Permalloy. Therefore, the demand of measuring level current transformer iron core made of nano-crystalline alloy rapidly increased domestically.

[Sell] Magnetic Accessories

Thu, 17 May 2012 15:03:00 +0530

Magnetic accessories
Material: Nd2Fe14B + other rare earth material

Applications: Neodymium magnet are widely used in various motors. Such as electric motorcycle, Wind turbine generator,MRI, Motor generator and Meter apparatus,Sensors,Computer rigid disc drives,Toys,Various holders.

Properties:
N35 to N52 neodymium magnets working temperature: 80 deg. C
N33M to N50M neodymium magnets working temperature: 100 deg. C
N30H to N48H neodymium magnets working temperature: 120 deg. C
N30SH to N45SH neodymium magnets working temperature: 150 deg. C
N28UH, N30UH, N35UH, N38UH, N40UH working temperature: 180 deg. C
N38EH, N30EH, N35EH, N48EH working temperature: 200 deg.

The specification(dimension) of magnet can be customized according to client's requests and design.

[Sell] Offering Amorphous Core

Thu, 10 May 2012 10:04:00 +0530

Core: AMCC series
Output filter or inductor cores in high frequency large power supplies
Transformer cores in switch mode power supplies
High saturate induction reducing core volume
Rectangular form easy to mount coils
With air gap excellent anti-bias current ability
Low core loss and temperature rise
Nice stability
Working temperature: -55 to 130C

[Sell] Electromagnetic Lifters

Mon, 12 Mar 2012 15:26:00 +0530

We are engaged in offering clients hi-tech range of Electromagnetic Lifters, which are available in different technical specifications to meet with the exact requirement of clients. These are widely used in diverse industries for loading and unloading of material. Further, Electromagnetic Lifters offered by us are fabricated using the latest technology & highly durable range of components to ensure maximum strength, long life, low maintenance and superior performance. Moreover, We can also customized Electromagnetic Lifters as per clients specific requirement at an very affordable price.

Please contact us, for your requirement.

[Sell] Pledco.Broadcast Series Outdoor Led Display

Thu, 09 Feb 2012 15:31:00 +0530

Broadcast Series Outdoor
OUTDOOR-PH13,3-CREE-P OUTDOOR-PH16-CREE-P OUTDOOR-PH20-CREE-P OUTDOOR-PH26,7-CREE-P
Levels of gray & Total colorsFull color ,65536 levels of gray for each color, over 281 billion colors
Frequency of Renewal:60Hz,Over 1000 - 12000 frames/sec standard available, higher refresh rates on demand
Auto Dimmer:Available.
Ingress protection:Display front an back side IP67, Power Supply Unit IP54
rive methode:Static constant current, 16bit
Control communication:Ethernet TCPIP, RS232, RS485, USB, Optional: Optical fiber / 3G / GPRS / Artnet / NTCIP
LED Pixel specification
LED brand brand:Cree packaged by Cotco or Nichia packaged by Nichia
Virtual pixel pitch:6,65mm 8mm 10mm 13,35mm
Physical pixel pitch:13,3mm 16mm 20mm 26,7mm
LED Size & Configuration:346 1R 1G 1B 346 1R 1G 1B 346 1R 1G 1B 346 1R 1G 1B
Pixel Density: 5625 by Square meter 3906 by Square meter 2500 by Square meter 1402 by Square meter
Total weight per tile:2.7g without power supply, 4kg with power supply
Basic tile size:320mm x 320mm
Brightness:6000cd/m2 at least, higher brightness level available on demand
Brightness control:100 levels manual and 8 levels of automatic brightness control available, light sensor for automatic control available
Viewing angle:110 horizontal / 45 vertical
Control System:
Synchronous or Asynchronous available, depending on project requirement
Basic Cabinet Size:1280mm x 320mm (Custom configuration available)
Total weight:18Kg per cabinet, 45kg per square meter
Cabinet Color:Black, custom color available
Single / Double Face:Single and double face available
Material:Die cast aluminum, Aluminum, Stainless steel
Maintenance:Maintenance from back side, front maintenance available
Electrical and operation specifications
Maximum power consumption / SQM:460W 350W 320W 230W
Average power consumption / SQM:153W 117W 107W 77W
Power Required:AC 90V-250V at 4764HZ
Auto Power On/O:Yes
Rate of control deviation:Whole screen 2/10000

[Sell] Sintered Ndfeb Magnet

Wed, 07 Dec 2011 15:13:00 +0530

The most powerful rare earth magnets available, sintered NdFeB is produced by powder metallurgical process with chemical composition of ND2Fe14B, which are hard, brittle and easily corrode, involving the sintering of compacts under vacuum. Poorest corrosion resistance of all commercial magnetic material. Grinding and slicing possible; Very reactive with moisture and oxygen; Coating may be applied depending on the expected environment. The sintered NdFeB magnet has high remanence, high coercive force, high-energy product and high ratio between performance value and product cost. It may be easily formed into various sizes. The intrinsic coercive force is over 30, 000 Oe

Application of Sintered NdFeB:
Especially suitable for used in various electronic motors, engineering equipment, medical equipment, Health bandages and plasters, audio apparatus, Micro products of Auto, National defence, Security systems, Computer, Biology project, Instrument and Meter, household appliances, Magnetic separators, Magnetic resonance imaging, Speciality door catches, Filters & strainers, Sensors Speakers, Microphone / earphone, High performance motors, Brush less motor, Micro motor / servo motor, VCM(voice coil motor) Automobiles, Magnetic coupling Magnetic Chuck, Magnetic toy, Magnetic tools, Other magnetic applications.

Type: N30~N52; N27M~N50M; N27H~N48H; N27SH~N45SH; N25UH~N40UH; N25EH~N38EH; N30AH~N33AH
Shape: Round, Ball, Square as customer demand
Coating: Zn, Ni, etc as customer demand

[Sell] Anisotropic Magnet

Tue, 08 Nov 2011 12:49:00 +0530

Use for floating fan motor, small motor, new products of Hi-Tech.
Anisotropic magnet is mainly used in the occasions with strong suction.

The motor magnetic strip is primary applied for the small-size precision motors such as the motor of floating fan , small motor recorder, VCD, walk man, computer fan and so on.
High quality and custom-made order acceptable.

For more details please contact us.

[Sell] Ferrite Resin

Tue, 12 Jul 2011 11:31:00 +0530

Manufacture of Ferrite resin refers to mixture of Ferrite and polymer resin after extrusion process. The Ferrite resin is manufactured to isotropic raw materials and anisotropic raw materials.
Features and solidity for mixing ratio are classified, and Ferrite resin can be manufactured in radial method or polar anisotropic method based on designs.

[Sell] High Quality Rubber Magnet

Tue, 12 Jul 2011 11:29:00 +0530

Product sort : Rubber Magnet
Outline for product : DY(Deflection York) product is used for improving resolution and function of color TV and Monitor product.
Feature & function :In order to achieve high quality CRT and CDT, use rubber magnet as correction for the quality of DY; this allows electromagnetic line, including comet part, to pass shadow mask.

For more information, please contact us.

[Sell] Plastic Magnet For Sensor

Tue, 12 Jul 2011 11:28:00 +0530

Product sort : Plastic Magnet for Sensor
Outline for product : It is a sensor magnet for applying control during operation of motor; easy for bipolar/multi-polar application.

Feature & function :
1. Easy to process, and easy to deal.
2. Easy to change the standard.
3. Easy to change the shape and measurement.
4. Easy to apply change.

For more information, please contact us.

[Sell] Plastic Magnet For Motor

Tue, 12 Jul 2011 11:27:00 +0530

Product sort : Plastic Magnet for Motor
Outline for product : It is easy for multi-polar application using polar anisotropic injection moulding, and is used as high speciality magnet motor, and available for production for sine-wave or square-wave, depending on the usage.

Feature & function :
1. Easy to process, and easy to deal.
2. Easy to change the standard.
3. Easy to change the shape and measurement.
4. Easy to apply change.

[Sell] Heavy Duty Electromagnetic Chuck

Tue, 05 Jul 2011 14:31:00 +0530

We provide heavy duty electromagnetic chuck. These heavy duty electromagnetic chuck are available in rectangular and round shapes. Our heavy duty electromagnetic chucks are designed to give strong magnetic field to hold the work piece rigidly. It generates low hear and economical for power consumption, electromagnetic chucks are very efficient since the work can be loaded unloaded just by switching operations. Our heavy duty electromagnetic chucks are tested for insulation test, high voltage test, resistant to earth terminal test, demagnetizing test, operating test and waterproof test.

Our heavy duty electromagnetic magnetic chucks are offered in various variants.

Feel free to contact us.

[Sell] Lifting Electromagnet (Lifting Magnet)

Fri, 11 Mar 2011 10:35:00 +0530

Lifting Electromagnet for Lifting Blooming Billet and Girder Billet
This series are most widely used rectangular electromagnets, suitable for lifting and transporting square billet, steel ingot , large blooming and so on, and also used for lifting and transporting round, profiled bar and so on. Different magnetic circuits are adopted for different type of steels, with the property of farther permeability depth.
About Inquiry
To help you get the best magnet for your application, we should have the following information:
1. What are the materials you want to attract?
2. What kind of steel and iron? For example: Steel scraps, steel billet, ingot, plate, bar or ball.
3. What' s the lifting capacity you expect?
4. What kind of working site does the magnet work?
5. Do you want the Cable Reel? If yes, tell me hoist height of the crane.
6. Do you want the electric controller.

[Sell] Lifting Electromagnet (Lifting Magnet) For Handing Steel Scraps

Thu, 10 Mar 2011 10:46:00 +0530

Kemeida lifting electromagnet currently operates in the largest of production lines to the smallest job shops and provides the same advantages of safety, high performance, and low operating cost for each user. For sheet, plate, block, round or angle, Kemeida has a magnet for any application. Let Kemeida's engineers evaluate the feasibility of applying our principle to your magnet application.

How Electromagnet Works?
Here we take scrap steel for example. An electromagnet can be used for moving scrap steel from one place to another. In a scrapyard, a crane has a large iron disc that is not a permanent magnet. The crane operator lowers the electromagnet into a pile of scrap steel and then switches on the electricity. This causes the steel disc to become a powerful magnet. Scrap steel is attracted to the disc. When the operator switches off the electricity, the scrap steel falls off the disc. In this way, large amounts of scrap steel can be moved easily from one place to another.

About Inquiry
To help you get the best magnet for your application, we should have the following information:
1. What are the materials you want to attract?
2. What kind of steel and iron? For example: Steel scraps, steel billet, ingot, plate, bar or ball.
3. What' s the lifting capacity you expect?
4. What kind of working site does the magnet work?
5. Do you want the Cable Reel? If yes, tell me hoist height of the crane.
6. Do you want the electric controller?

[Sell] Sell Rare Earth Neodymium Tile Magnets For Motor 01

Sat, 26 Jun 2010 14:55:00 +0530

We are offering Rare Earth Neodymium Tile Magnets For Motor 01, our magnets have good performance with competitive price

Specifications :

Grade 35EH
R68.76xR56.38x22.50x18.88, etc
Nickel plating.

If you have any inquiries, please don't hesitate to contact us.