Tradeindia.com - Sell leads in Electronic Testing Equipment

[Sell] Rohde & Schwarz Fsu26 Spectrum Analyzers

Mon, 21 May 2012 22:30:00 +0530

Rohde & Schwarz FSU26 Spectrum Analyzer 20 Hz - 26 GHz

The Spectrum Analyzer R&S FSU is another milestone. New circuit concepts, advanced RF components, A/D converters and ASIC technology,extensive experience gained from a variety of applications and customer requirements - all this combines to form a solid basis on which the R&S FSU was developed. Its unparalleled features enable the use of new test methods - to your advantage. The future-oriented concept combines unprecedented performance with continuity. The R&S FSU is compatible with the R&S FSE and R&S FSIQ, the industry standards to date. Test routines and sequences generated for the R&S FSE or R&S FSIQ can be used on the R&S FSU too. TheR&S FSU family thus secures your investment.

The operating concept of the top analyzer R&S FSU is the same as that of the general purpose analyzer R&S FSP, so these instruments offer a uniform platform for a variety of applications.

Performance :

* Frequency range 20 Hz to 26.5GHz
* Displayed average noise level -158 dBm (1 Hz)
* Phase noise -123 dBc (1 Hz) at 10 kHz
* TOI typ. +25 dBm
* Resolution bandwidth 1 Hz to 50 MHz

RBW-characteristics :

* Digital filters from 10 Hz to 100 kHz (1,2,3,5 steps)
* Analog filters from 300 kHz to 10 MHz (1,2,3,5 steps)
* 39 channel filters from 100 Hz to 5 MHz
* RRC filters (NADC, TETRA, 3GPP)
* EMI filters: 200 Hz, 9 kHz, 120 kHz FFT filters 1 Hz to 30 kHz
* FFT filter mode adjustable.

[Sell] Rohde & Schwarz Zvt Vector Network Analyzers

Mon, 21 May 2012 22:28:00 +0530

Rohde & Schwarz ZVT 300 KHz to 20 GHz with two up to eight test ports

The R&S ZVT is the first true eight port/six port vector network analyzer with a frequency range from 300 KHz to 8 GHz/10 MHz to 20 GHz.

Key Features :

* Multiport measurements, avoiding any time loss due to matrix control
* Flexible configuration of test ports for balanced and single-ended measurements
* True differential measurements and coherent signal generation
* Enhanced performance by parallel measurements on several DUTs
* Multichannel receiver with simultaneous sampling of channels, e.g. for phase measurements on antenna arrays
* Automatic calibration units
* Point-in-pulse and pulse profile measurements with up to 16 receivers.

[Sell] Capacitor Testing & Sorting Machine (HB-Cx200)

Sat, 19 May 2012 14:38:00 +0530

1. Introducing:
This Machine Designed based on the features and product's require of Metalized Film Capacitors and Safety Capacitors with High Frequency Sorting and Testing function. This Machine build up with fully Mechanical construction and fully Cam Power Transmission for get a long service-time.
This machine will be used for testing and sorting the capacitors with different parameters accurately, and sorting it out according to the testing result automatically. This machine got high speed for 90PCS/min.

2. Processing Guide:
Capacitors will be transfer from Automatic Feeder Bowl to the Machine's Snatch System by Conveyor Belt. Capacitor's Leader Wire will be straighten in the transfer from Horizontal and Vertical then go to for 10kHz Dissipation ( TAN) Testing before Charging. Following it will be DV/DT testing with High Frequency by couple of stations. After that Capacitors will go to next process for Fo (Arc) Testing, after couples of station's charge and discharge products go to AC/TV testing, following it will be DC/TV Testing, after these processing rejects will be sorted out automatically into box. Eligible products will go to next testing for IR (Insulation Resistance) Testing and the rejects will be sorted out automatically.
After that the Eligible products will go to Capacity(C) and Dissipation(TAN) Testing by 100HKZ and 1kHz. After it the products will be sorted out for rejects and eligible automatically.
At same time the computer system will get record for Capacity and Dissipation in different Frequency, save as an illustration easy for operator to get these information.

3. Specification of the Testing Meters:
(1) Dissipation ( TAN) Testing before Charging
Testing Frequency: 1kHz-10kHz
Testing Voltage: 0.1V-1.5V± 0.01%
Testing Range: 100PF-9.9999UF
(2) DV/DT Testing: Frequency: 10kHz(None Polar adjustment)2000V
(3) Fo (Arc) Testing:
Testing Voltage: DC0-2000V
Testing Style: Short circuit discharge & Resistance discharge.
Testing Frequency: Tw

[Sell] Impact Tester TW-201

Wed, 16 May 2012 12:30:00 +0530

Purpose : Reduce the material damage or the danger of imitation toys protection devices as the real face.
Range: imitation protect device ( clear material protector, headpiece,cap,blinker)
Standards: EN 71-1998 8.7

Specifications :
Dimension:300*300*16mm
Adjust height:0-200mm
Impact hammer diameter:80.00mm
Impact hammer weight :1Kg
With metric / lmperial unit height dicate ruler.

[Sell] Leaper-56 Pocket Universal Programmer Of Leap Electronic

Fri, 11 May 2012 11:42:00 +0530

LEAPER-56
Pocket Universal Programmer / Smart-phone size and ICT level universal programmer

Introduction
The LEAPER-56 is a pocket size universal programmer.
It provides with 75MHz bandwidth and < 2.5nS signal skew just in smart-phone size.
The programming efficiency is much better than the other programmers on the market in any time and any condition.
By letting your PC or laptop connect with LEAPER-56, it will perform your outstanding ability of development and debugging.
You can easily have professional factory-level productivity.

Features
Portable mini size. Without socket, only 136mm(L)* 90mm(W)* 20mm(H).
You just need to connect with USB cable to use.
No additional power supply.
Provide with DUT 75MHz bandwidth and < 2.5nS signal skew.
In addition to the high processing speed, you can verify whether the ICs processing frequency meets the specifications.
Via USB HUB, you can connect multiple LEAPER-56s to do gang programming.
It makes development and mass production proficient.
Provide with DUT device pin checking and memory components ID verification.
Ensure the best yield rate of processing.

[Sell] IWT-5000A Impulse Winding Tester

Thu, 10 May 2012 18:25:00 +0530

Introduction
IWT-5000A winding tester is a coil (such as voltage transformer, inductance, motor) testing instrument that tests self-insulating property of the coil. The influences of winding materials, magnetic materials, and framework, also extra fabrication decreases the insulating property of coil layers along with the jumpers and jacks. The IWT-5000 adopts the technology of high-speed sampling rate to store the sample waveform of the standard (master) coil in the instrument. By comparing the waveform results of the test coil to the master, the defect in the DUT can be found easily. Moreover, the IWT-5000 judges the quality of the testing coil according to the parameter set by the user.

Features
With 200V~5000V programmable impulse voltage, it is capable of low-energy testing, without damaging the coil.
Provide high-speed sampling rate of 100MHz, which enhances the testing ability for partial discharges.
320 x 234 color LCD display clearly for the user to view waveform and test results.
Provide user-friendly operation interface.
Low inductance during impulse testing, minimum to 0.2uH.
Provide 4 kinds of detection modes: AreaSize Comparison, DiffZone Comparison, Corona Amount Comparison, and Corona Number Comparison.
The comparative result shows Pass/Fail directly, informing operators the detect test result within a short period of time.
Offer measurement functions for voltages, timing and frequencies, which provide user a carry-out analysis in detail.
Able to save 360 sets of standard waveform result of the coil for users to download and implement into testing.
Provide RS-232 to PC connection. Just using standard text command, you can writing control program and data for communication easily. It's the best way to set up the testing system for mass
production.

[Sell] Humidity Transmitter

Tue, 08 May 2012 15:46:00 +0530

Name : Humidity Transmitter
range: 0 to 100%
Output: 4-20 mA
Supply : 24 VDC

For more details please contact us.

[Sell] Pressure Tansmitter

Tue, 08 May 2012 15:45:00 +0530

Product : Pressure transmitter
Range: Vaccume to 1000 Bar
Output: 4-20 mA

For more details please contact us.

[Sell] Datalogger

Tue, 08 May 2012 15:45:00 +0530

RH & Temperature Datalogger
range: 0to 100% rh
-40 to 60 Deg. Temp.
Real time record.

For more details please contact us.

[Sell] Pressure Trasmitter

Tue, 08 May 2012 15:44:00 +0530

Product : Pressure Transmitter
Ranges : upto 1000 bar
output: 4-20 mA
Supply : 24 VDC

[Sell] Test Equipment Load Cell

Tue, 08 May 2012 07:41:00 +0530

Hariom Electronics offers best quality of Load Cells that are used in Testing & Measuring Equipments.

These product are designed for various applications like:

- Electronic Weighing Machines
- Universal Testing Machines
Tensile - Compression
- Process Control
- Counting , Filling , Check-Weighers
- Batch Control
- Fisheries, Dairy Plant
- Silos / Tanks Weighing
- Reactors / Destination Cattles
- Monitoring Force / Robotics / Torque
- Industrial Process Automatons
- Pharmaceuticals Industries
- Packaging Industries
- Peak Value Testing Machines
- Hardness Testing
- Fully Electronic Road Weighing Bridges
- Rail Weighing Bridges
- In-Motion Weighing Machines
- Weighing Bridges

They are also used to measure the tension load or compression force with different capacity available from 1 kg to 500Tons.

For more details, please contact us.

[Sell] Temperature Equipment

Tue, 01 May 2012 16:50:00 +0530

Offering state of the art temperature indicators, temperature controllers, PID controllers, calibrators, scanners & data logger, bar graph indicators thermocouples, recorders, tachometers, digital timers, SMPS and pressure transmitters with high accuracy and reliability.

For more details please contact us.

[Sell] Flow Transducers

Tue, 01 May 2012 11:24:00 +0530

We offer to sell transducers, flow transducers models which measure 0.025 - 12 l/min depending on the nozzle diameter and 3 - 30 l/min. Current transducers, power transducers, frequency transducers and voltage transducers also available.

[Sell] Multi-Function Water Detector

Thu, 26 Apr 2012 11:14:00 +0530

Model:S-6A
Product Description
Features
1.Small volume and lightweight: The emitting and reception are combined in the same case. It is able to take apparent resistivity measurement and induced polarization measurement simultaneously.

2.Many measurable parameters: The instrument can directly measure and display the parameters such as primary field potential Vp, self-potential voltage (namely Vsp), supply current I, apparent resistivity RO (namely PS).

3.PolarizabilityM1~7 (namely S1~7), half-life time TH, degree of damping (D) and deviation (R), and synthesis excited electron parameter Zp. Coordinating with the high-density switcher device above 60 channels, the method of high-density resistivity can be realized on it.

4.Convenient and flexible operation: Adopting automatic digital measuring, the instrument can automatically compensate for self-potential, drift and electrode polarization. With the large LCD screen, 9 patterns of poles distribution can be displayed. During the operation, the parameters are inputted through the key panel. After some point is measured, the curves of apparent resistivity RO, apparent polarizability M and half-life time are displayed directly.

5.Convenient for data interpretation: The instrument can store the measured results up to 1200 points. Through the serial port RS-232, with the help of related software, the measured data is transmitted to the computer, and several methods can then be used for digital interpretation.

6.Beautiful and solid: The instrument adopts a large screen and a multi-layer touch panel with thin-film sealing. And self-protection of over-voltage and heavy current in power part make the instrument applicable for various field environments.

7-.With the fault diagnosis program, it can real-time display the common faults.

[Sell] Chain Roller

Tue, 10 Apr 2012 15:32:00 +0530

We are offering wide range of Chain Roller. These are manufactured by the quality raw material. These are fulfill all the required parameters of international quality parameters. We offer tailor made products as per the requirement of our clients. The products are designed and fabricated as per their specifications and delivered within the specified time frame.

Our clients place consistent bulk orders with us and admire us for our ability to meet their demands promptly. These are available at market leading price.

Kindly contact for more details.

[Sell] Cable Fault Tester

Sat, 07 Apr 2012 14:24:00 +0530

Auto-judge the discharge of fault point,the process is reminded by English menu.
Test the fault type automatically and indicate the test method
Automatic measurement to find the fault point.
Comparison display of automation and manual wave.
Measurement method: impulse,flash voltage
Measuring range: Smax 50km
Smin: No blind area
Coarse Test error: 5m
Own all the function of general PC;Site camera Function and wireless communication function
Real-time expert instructs at site or wireless fax
Main instrument can collect and record the defect wave wireless way when adopts high resistance detection
U-disk with USB interface is adopted for moveable storage
Micro-printer of Integration
Operation: Touch-screen operation
Display: 10" industry level LCD monitor
Working Power: AC 220V (110%) 50Hz(15%)
DC 24V internal storage battery.
Operation Environment :
Temperature: -10C 50C RH<=90%
Size:350*250*160mm
Weight:5Kg.

[Sell] High Voltage Tester

Wed, 28 Mar 2012 11:44:00 +0530

We are offering a wide range of High Voltage Tester to our clients as per their requirement. This is specifically designed for functioning of the capacitor at high voltage test. The instrument works on mains supply and is housed in a compact metallic cabinet powder coated with arrangement to lift. These testers can be manufactured according to the clients requirement and are available at affordable prices.

Some silent features of High Voltage Tester are mentioned as below:
* Compact size
* Lightweight
* High efficiency
* Reliable.

[Sell] Static Charge Meter

Wed, 21 Mar 2012 18:11:00 +0530

Static charge meter is a lightweight, precision electrostatic charge meter that features stabilized sensor for accurate measurement. The maximum measurement range is from 0 to 10 KV at meter to object distance of one inch. A 2-1/2-digit LCD provides 100-Volt resolution with polarity indication.

Measuring Procedure :
Put the ON OFF switch to ON Position. First press the PRESS TO READ switch on the meter, bring the instruments towards the object at one inches now displays reading from the ZERO to +/- 10.0 KV,For example.

Reading
x Distance
= Static Voltage
2.2 KV
1 Inches
2.2 KV
8.5 KV
1 Inches
8.5 KV

If the value is more (i.e.,display shows > 10.0 Kv), Release the PRESS TO READ switch.

Maintenance : This instrument is designed to the completely maintenance free. There are no parts inside which can be replaced by the user himself. Incase of malfunction or re-calibration contact manufacturer.

[Sell] LED Test Machine & Sorter

Wed, 29 Feb 2012 12:58:00 +0530

1. Accomplishing Expending & chip-level Probing & Sorting function in a system.
2. Feeding LED Chips for Electric & Optical Tests and Sorting Tested LED Chips by its Test Grade.
3. Automatic Wafer Stacker Loading.

[Sell] TFT (Thin Film Transistor)

Wed, 29 Feb 2012 10:56:00 +0530

Thin Film transistor are used in the different types of monitor and process monitor of various leak testing and measurement equipment.

[Sell] Smart LCD TFT (SLT)

Wed, 29 Feb 2012 10:55:00 +0530

We provide Smart LCD TFT are Thin Film Transistor which are used in the various testing and measurement Equipment.

[Sell] Oscilloscope

Wed, 22 Feb 2012 08:06:00 +0530

We are authorized distributor - India for the Oscilloscope hand held with battery back up, slim type, power supplies from France.

If any company is looking for these products kindly contact us.

[Sell] Digit Multimeters

Sat, 18 Feb 2012 17:51:00 +0530

We offer the Digital Multimeter that is a light weight device used for measurement of energy and power in a convenient manner. This digital multimeter is offered in various capacities and is widely used for power lines and parallel instruments.

This range is manufactured using modern technology and machines that are constantly updated at our end as per the changing industry requirements. Besides, we offer clients customized solutions with this products range as that help us cater to their emerging needs and requirements.

We have good business relations with some of the well-known Digital Multimeter and clamp meters manufacturers, which further allows us to offer products as per our customers' requirements.

Feel free to contact us.

[Sell] Battery Testing Equipment

Mon, 23 Jan 2012 23:17:00 +0530

We are offering battery testing equipment, that are known for accurate and reliable results and high operational efficiency.

Application :
* Battery Capacity Tester
* Battery Life Cycle Tester
* High Rate Discharge.

For more details, please contact us.

[Sell] Digital Fault Locators

Thu, 12 Jan 2012 23:02:00 +0530

We are engaged in offering the best quality dta cable fault locator. These fault locators are manufactured using premium quality of raw material. These fault locators can detect the tear in wire and display it on the screen.

For more details contact us.