Tradeindia.com - Sell leads in Battery And Battery Management Systems

[Sell] Telecom Battery Asset Management System

Fri, 18 May 2012 18:35:00 +0530

Telecom Battery Asset Management System is a simple equipment which helps the telecom network operator to monitor & manage the battery assets remote sites.
The intelligent system collects all the operating conditions information from one to two battery banks at each site giving a complete insight into the health of the battery assets.
Individual cell voltage monitoring as well as discharge cycle count measurement helps in ascertaining bad cells in advance thus preventing complete strings failure.

Competitive Advantages of the product:
Continuous monitoring and recording of Voltages, Currents & Temperature of the battery bank(s).
Environmental parameters such as ambient temperature, humidity, battery temperature etc.
16x4 LCD and keypad.
Identifies faulty cell by monitoring cell level voltage.
Remote monitoring of battery health through GPRS modem communication.
Online status of Battery bank parameters.
Provides alarm notification.

[Sell] Li-Ion Battery Microporous Film

Fri, 18 May 2012 08:50:00 +0530

Widely used in mobile phones, portable computers, cameras, video cameras and other electronic products field

1) have electronic insulation, ensure the mechanical isolation are aligned; (2) have certain aperture and porosity, ensure low resistance and high conductivity of lithium ion, have very good through the sexual; (3) because of the strong polarity solvent for electrolyte of organic compounds, the diaphragm must electrolyte corrosion resistance, have enough chemical and electrochemical stability; (4) to the electrolyte invasive good and have enough to absorb fluid moisturizing ability; (5) have enough of mechanical properties, including puncture strength, tensile strength, thickness and so on, but as small as possible; (6) space stability and level off the gender is good; (7) thermal stability and automatic shutoff protection performance.

PP/PE double film and PP/PE/PP three layers of the diaphragm and merges with low melting temperature of PE and high temperature melt the PP broken two properties, become the hot spot of research and development. Multi-layer diaphragm not only provides low temperature, and the closed pore in PE film closed pore PP layer after maintain the strength, from micro porous block to the diaphragm rupture melting temperature range wide, safety between than single-layer film is good.
In addition, the structure of the hole also influence of automatic shutoff protection performance, high reliability and small aperture and to stop and to cut off the abnormal current is an advantage, but too high reliability and too small and aperture and affect its ionic conductivity

Detailed introduction to lithium battery film/polyethylene battery film/battery separator:

Lithium battery film/polyethylene battery film/battery separator for lithium ion battery,and lithium battery.
Thickness:16/18/20/25/30/40um.

[Sell] Battery Capacity Tester Abt18

Thu, 17 May 2012 10:38:00 +0530

MECO Introduces Battery Capacity Tester - ABT 18
Features- Affordable, Portable and Compact, No need for technical knowledge, Know capacity of Battery in 3 Seconds

MECO is recognized as manufacturer of reliable, long lasting and affordable electronic test and measuring instruments since 50 years, introduces MECO Battery Capacity Tester ABT 18. Battery Capacity Tester ABT 18 is designed to check capacity condition of different types of batteries ranging from 2 Ah to 200 Ah and having 2, 6 and 12 V DC. The 'full' (white), 'normal' (green), 'recharge' (yellow), 'discharged' (red) are directly indicated on the meter dial, so as to check the quality of the battery visually and rapidly. The tester can also check the quality of various types of electric switch, such as headlamp switch, tail lamp switch, relay switch, starting switch etc. A reference plate attached to the front panel of the tester, for customer's reference, indicates the relations between the cylinder capacity of different car engines and the specifications of the battery required. The Battery Tester ABT 18 gives results in 3 seconds.

The Battery Capacity Tester ABT 18 is ideal for the industries such as Automobile Industry, Battery Industry, UPS Industry, Solar System Industry, Wind Energy Solution Providers and Crane and Fork Lift Industry and many other industries where batteries are used. For manufacturers, service centers, technicians, dealers and service executives of Automobile industry MECO Battery Capacity Tester ABT 18 provides unique solution to check capacity of battery instantaneously. As the Battery Tester ABT 18 is designed by considering the problems faced by people on the field in these industries while carrying, handling and using the testers for checking batteries available in the market today.

[Sell] ER17335M Primary Lithium Battery

Wed, 16 May 2012 08:46:00 +0530

ER17335M-2/3A
Primary Lithium Battery
Specification :
Max Dimension : 17.0x33.5mm;
Nominal capacity: 1700mAh (3mA/2.0V);
Nominal voltage: 3.6V;
Max constant discharge current: 400mA;
Max pulse current: 1000mA;
Operating temperature range: -55 ^+85

Primary Lithium Battery Type ER17335M has the advantages of high energy density, high open circuit voltage, wide range of operating temperature, stable operating voltage and current(over 90% of the total capacity is discharged at a high plateau voltage), long operating time (over 8 years ) for continuous low current discharge with medium current pulse and low self-discharge rate (less than 1% per year).

Its main applications are : Utility Meters, Main-Frame computers, PCs, GPS,Wireless Communication, Asset Tracking ,Law Enforcement, Earth Detector, Digital Control Machine, Portable Communication Equipment, Military Radio Stations, and other electric powered devices requiring small current drain high current pulse long operating life applicable batteries.

Place of Origin: China
Serial / Model No.: ER17335M
Trademark / Brand: FANSO
Packing: Carton
Payment Terms: L/C, T/T(Bank Transfer), Negotiate
Minimum Order: 20 Piece/Pieces
Shipping: 7 days

[Sell] Electric Vehicle Charging System

Fri, 11 May 2012 15:14:00 +0530

Features and Specification :
Bi-Directional Converter
-AC to DC mode: Internal Battery Charging (up to 30 kW)
-DC to AC mode: Peak Load Reducer / Grid-tie Inverter (up to 30 kW)
PV converter
-MPPT charging
Series-Compensated DC/DC Converter
-Battery in EV is recharged by Battery-to-Battery Energy Transfer instead of using the grid
-xtremely fast EV battery recharge time is possible (with zero power demand from the grid)
Key Benefits
-Utility power demand is not increased wile EV battery is undergoing a very fast recharge less than 10min @ 80% Load
-Size and cost of EV battery charger can be minimized Bi-Directional Converter can be used as a Peak Demand Reducer / Grid Load Leveler
-Battery to Battery charging system minimizes EV battery recharging time.

[Sell] Battery Sockets

Wed, 02 May 2012 19:29:00 +0530

Our company offers to our clients high quality range of battery sockets with high quality material & provide long lasting service. Fabricated with supreme quality raw material & latest technology. Known for high performance, enhanced insulation attributes and protection from environmental influences. Our clients can avail these products as per their requirements.

For more details contact for us.

[Sell] 3.6v ER18505M Lithium Battery

Mon, 23 Apr 2012 14:38:00 +0530

We offer 3.6v ER18505M Lithium Battery
Specification:
Max Dimension: 18.5x50.5mm;
Nominal capacity: 3500mAh (5mA/2.0V);
Nominal voltage: 3.6V;
Max constant discharge current: 1000mA;
Max pulse current: 2000mA;
Operating temperature range: -55 ^+85
Primary Lithium Battery Type ER18505M has the advantages of high energy density, high open circuit voltage, wide range of operating temperature, stable operating voltage and current(over 90% of the total capacity is discharged at a high plateau voltage), long operating time (over 8 years ) for continuous low current discharge with medium current pulse and low self-discharge rate (less than 1% per year).
Its main applications are : Utility Meters, Main-Frame computers, PCs, GPS,Wireless Communication, Asset Tracking ,Law Enforcement, Earth Detector, Digital Control Machine, Portable Communication Equipment, Military Radio Stations, and other electric powered devices requiring small current drain high current pulse long operating life applicable batteries
Place of Origin: China
Serial / Model No.: ER18505M
Trademark / Brand: FANSO
Packing: Carton
Payment Terms: L/C, T/T(Bank Transfer), Negotiate
Minimum Order: 20 Piece/Pieces
Shipping: 7 days.

[Sell] ER14250-1/2aa 3.6v Battery

Mon, 23 Apr 2012 13:01:00 +0530

We offer ER14250 3.6v Lithium battery
Specification:
Max Dimension: 14.5x25.2mm;
Nominal capacity: 1200mAh (1mA/2.0V);
Nominal voltage: 3.6V;
Max constant discharge current: 25mA;
Max pulse current: 100mA;
Operating temperature range: -55 ^+85
ER14250 can replace LS 14250 SB-AA02 XL-050F TL-4902Primary Lithium Battery Type ER14250 has the advantages of high energy density, high open circuit voltage, wide range of operating temperature, stable operating voltage and current(over 90% of the total capacity is discharged at a high plateau voltage), long operating time (over 8 years ) for continuous low current discharge with medium current pulse and low self-discharge rate (less than 1% per year).
Its main applications are : Utility Meters, Main-Frame computers, PCs, GPS, Wireless Communication, Asset Tracking ,Law Enforcement, Earth Detector, Digital Control Machine, Portable Communication Equipment, Military Radio Stations, and other electric powered devices requiring small current drain high current pulse long operating life applicable batteries.
Place of Origin: China
Serial / Model No.: ER14250H
Trademark / Brand: FANSO
Packing: Carton
Payment Terms: L/C, T/T(Bank Transfer), Negotiate
Minimum Order: 20 Piece/Pieces
Shipping: 7 days.

[Sell] Battery Box

Mon, 16 Apr 2012 15:50:00 +0530

Battery box is made up of good quality aluminum. It is painted by special quality colour which is water and temperature resistant.
The specially designed shape of battery box allows easy mounting on the pole. It is mounted with the help of ms clamps which holds junction box firmly.
It comes with locking facility so that not every one can open it.
the size of battery box varies according to the size of batteries used.

Functions : --->
1) It has sufficient space to kept battery.
2) It has proper holes for taking wires outside. 3) the battery box prevents battery from damage.
4) Avoid damage of battery from water, sunlight.
5) Avoid damage of terminals of battery due to dust clotting.
6) Assures safety for public as connections are kept inside the battery box.

Other Information

* Pay Mode Terms: L/C (Letter of Credit), D/A (Documents Against Acceptance), Other
* Minimum Order Quantity: 1 Piece/Pieces
* Port of Dispatch: Roadways/Airways/Railway
* Production Capacity: 1000/month
* Delivery Time: Ex Stock Available/ Immediately after money deposition

[Sell] Marine Battery

Thu, 01 Mar 2012 08:57:00 +0530

We are manufacturers of Marine Batteries. These optimal performance based Marine Battery are well appreciated for delivering excellent power backup as well as longer working life.

For more details please contact us.

[Sell] Vented LMLA Tubular Batteries

Thu, 01 Mar 2012 08:52:00 +0530

We manufacture Vented LMLA Tubular Batteries, flooded type. Ideal for use in all standby and deep cycling applications that require highest levels of reliability.

Features:
* Minimum maintenance.
* Deep cycle design.
* Abuse resistant.
* Tower type design.

[Sell] Lithium Iron Battery Pack

Thu, 02 Feb 2012 10:46:00 +0530

HIPOWER battery advantages:
Small size. High energy density. Light weight(1/4 of Lead-Acid battery)
High discharge rate. Deep cycling
No memory effect. Long lifecycle: 4-7 times than Lead-Acid battery
Maintenance free. No explosion. No fire
Good performance in low/high temperature (-20C~+70C)
No toxicity, no heavy metal LEAD pollution

[Sell] Battery Monitor

Wed, 04 Jan 2012 11:13:00 +0530

1. Continuous 24/7 on-line monitoring
2. One cellcheck monitor one cell, including internal resistance, voltage and temperature
3. Software is available to collect data from cellcheck
4. RS485 port with optical isolation, meet modbus protocol, easy to access UPS controller
5. Easy to install without specialized training
6. Full resistance, battery temperature and voltage monitoring for comprehensive battery state of health analysis
7. String voltage, string current and ambient temperature monitoring(need vct unit)
8. Automatic analysis of battery condition to estimate remaining battery capacity, indicating that the battery needs replacement or maintenance
(need cm unit)

Specifications
Use for 2V\6V or 12V battery, capacity from 30ah to 1000ah
Power requirements
Cellcheck: Powered from the battery
Vct unit: DC10~35V
Cm unit: DC10~35V
Protection
Test load and power paths are fused, reverse polarity and overvoltage protection for power input
Measurement range & accuracy
String voltage: 20~600V, 0.5%+0.2V
Cell voltage: 1.5~2.5V, 0.1%+1mv 4~15V, 0.1%+10mv
Internal resistance: 100~65535uω
2%+3 uω (2V battery, repeatability)
2%+30uω (6V, 12V battery, repeatability)
String current: 0~100A(optional), 2%+0.5A
Communications interfaces
Cellcheck: RS485, meet modbus protocol, support 200 devices on each bus
Cm unit: RS485, ethernet 10/100 mbps, meet
Modbus protocol
Insulation
2000vac
Installation
Paste on battery or rail mounting
Weight Cellcheck: 135g

[Sell] 5000mah Power Bank/Charger

Tue, 27 Dec 2011 23:31:00 +0530

Specification :

Product Size: 10.6x6.7x1.1cm
Net weight : 0.14kg
Cell Type: Li-polymer
- Capacity: 5000mAh
- Input: DC5V, Max 1A
- 2xOutput Ports: DC5V, 1A

Overview:
This external battery can charge your Ipad&Iphone at the same time!!
Excellent industrial finish, thin&lightweight,perfect for business trips/outdoors/travels
Compatible with Ipad 16GB/32GB/64GB, Iphone 2G/3G/3GS/4G, Ipod Touch/Nano/Classic all generations, other digital products:
- 3mm Charger
- 4mm Charger
- LG Mobile Phone
- microUSB Plug
- miniUSB Plug
- NDS
- NDSi
- Samsung Mobile Phone (New/ Old Model)
- Sony Ericsson Pop Port Other cellphones/digital products

What's Included:
- 1xPowerbank
- 10xDifferent Type Of Charge Connectors
- 1xUser Manual
- 1xProtective Pouch

How to Use:
- Use the included USB-Mini USB cable to charge the power station by AC adaptor(not included) or PC's USB port
- LED indicator will be on one by one in blue and red. Once it is fully charged, LED will be off
- Press the On/Off button for 3 seconds, the LED lines will turn blue. Connect the powerbank to Ipad/Iphone other digital products.
- Press the On/Off button for 3 seconds to turn off the battery
- Battery LED indicator to show the power levels: LED in blue - 60%~100%, LED in purple- 20%~60%, LED in red - under 20%.

[Sell] Lithium Battery(Li-Mno2)--Cr34615--3.0v--Lithium Battery

Tue, 22 Nov 2011 17:59:00 +0530

Model: CR34615 ( D )

Volume: 34.0*61.5 (mm*mm)
Noinmal Capacity: 12000MAH
Noinmal Voltage: 3.0V
Max. Constant Current: 2000MA
Max. Pulse Current: 3000MA
Workable Temperature: -60~+85

Advantage of goods:
Small size,light weight,widely storage lifetime.
High and stable operating voltage.
Low self-discharge rate(less than 2% after 1 year storage at 25C)
Widely operating temperature-60C~+85C)
Widely discharge performance(offering for small,middle or higher pulse current discharge)
and various fields.

6. Fine materials,precise manufacturing.

Application:

Memory backup(RTC real time clock and computer backup,etc.)
AMR utility meters:Electricity meter,gas meter and water meter etc.
Wireless alarm sensors:Smoke alarm systems,temperature monitors etc.
Romote monitor systems:GPS,sea buoy, life jacket lights,life craft lights,
Automotive and electronics:Automotive security systems,tire-pressure monitoring systems etc.
Electronics toll tags:Toll gates etc.
Military electronics:Radio communication,night vision equipment,tracking and positioning systems etc.
Main business cope:lithium batteries(3.6V lithium thionyl chloride(Li/SOCL2) and 3.0V lithium dioxide manganese(Li/MnO2)batteries), lithium ion batteries, nickel-metal hydride batteries, nickel-cadmium batteries.

[Sell] Sealed Maintenance Free (Smf) Batteries

Wed, 16 Nov 2011 22:43:00 +0530

We manufacture batteries of 6v 4.5ah used for weighing scales, emergency lights, ups etc. We also manufacture smf batteries of 12v 7.2ah, 12v 12ah, etc.

For more details, please contact us.

[Sell] Polycrystalline Photovoltaic Modules

Thu, 20 Oct 2011 18:41:00 +0530

Specifications

Tolerance +/-5% Cell Polycrystalline silicon solar cells 156*156mmNo.of cells 72(12*6)
Dimension of Modules(mm) 1957*992*50
Weight 22.5kg
Temperature and Coefficients
Operating Temperature -40~+85 Storage Temperature -40~+85 Maximum system voltage 1000 VDC max.
Snow/Wind Load up to 5400 Pa, 130km/h (800Pa)
Skyp: yinyanfei2011
Model
SLM235P-72
SLM240P-72
SLM245P-72
SLM250P-72
SLM255P-72
SLM260P-72
SLM265P-72
SLM270P-72
SLM275P-72
SLM280P-72
SLM285P-72

[Sell] Green Battery

Tue, 18 Oct 2011 18:07:00 +0530

TMK Power Industries Ltd., is a professional manufacturer specializing in researching, developing, manufacturing and selling the Ni-MH rechargeable batteries in Shenzhen, China. The company has passed the certification of ISO90012000, CE, ULROHS and OVONIC. TMK batteries are characterized by complete varieties AAA and AAASCCDF series, etc., high capacity and good consistency.

Especially in the development of battery with high-capacity, high-rate, high and wide temperature, TMK has the unique advantages and its technology is leading in the peer.

The products are sold to Europe, America, Southeast Asia, Hong Kong, Taiwan and all around the world. Products are widely used in wireless communications, R&C toys, household appliances, medical equipment, electric tools, electric bicycles, lighting and other fields.

[Sell] 8.4v 1500mah Airsoft Gun Battery

Fri, 23 Sep 2011 18:56:00 +0530

Specification :

NiMH 8.4V 1500mAh Battery Packs for Airsoft gun
1. Rated Capacity:1500mAh
2. Voltage:8.4V
3. Discharge Current:15C
4. Discharging Plug:Mini El Optional
5. Dimension : 1836105mm
6. Packing : Black/colorless PVC
7. Application : Ak series of Airsoft Gun.

[Sell] 8.4v 1800mah Airsoft Gun Battery

Fri, 23 Sep 2011 18:55:00 +0530

Specification :
NiMH 8.4V 1800mAh Battery Packs for Airsoft gun
1. Rated Capacity:1800mAh
2. Voltage:8.4V
3. Discharge Current:15C
4. Discharging Plug:Mini EL
5. Dimension: 18115mm,1888mm
6. Packing:Black/colorless PVC
7. Application: Ak series of Airsoft Gun.

[Sell] Ekg Battery For Ge Marquette Mac1000,MAC1200

Fri, 23 Sep 2011 17:07:00 +0530

Specification :
EKG Battery for GE Marquette Mac1000, MAC1100, MAC1200,MAC1500
1. Model : 30344270
2. Voltage : 18V3.Capacity:1300mAh
4. Battery Type: Ni-MH SCR
5. Color: Yellow/White
6. Weight: 756 g
7. Dimension: 215 * 68 * 23mm
8. Application:Compatible with GE Marquette Mac1000, MAC 1100, MAC1200, MAC1500.

[Sell] Defibrillator Battery For Nihon Kohden Tec-5521/Tec-5531

Fri, 23 Sep 2011 17:06:00 +0530

Specification :
Defibrillator Battery For Nihon Kohden TEC-5521/TEC-5531
1. Model : NKB-301V
2. Voltage : 12V3.Capacity:2800mAh
4. Battery Type: Ni-MH SCR
5. Color: Yellow/Red
6. Weight: 946 g
7. Dimension: 112*23*43mm
8. Application:Compatible with.

[Sell] ECG Battery For FUKUDA FCP-7101

Fri, 23 Sep 2011 17:02:00 +0530

Specification :
ECG Battery For FUKUDA FCP-7101
1. Model: 8/HRY-4/3AFD
2. Voltage:9.6V3.Capacity:3800mAh
4. Battery Type: Ni-MH A
5. Color: Green/Blue
6. Weight: 637g
7. Dimension: 101*69*18mm
8. Application : Compatible with.

[Sell] 9.6v 1500mah Airsoft Gun Battery

Fri, 23 Sep 2011 17:01:00 +0530

Specification :
1. Rated Capacity1500mAh
2. Voltage9.6V
3. Discharge Current15C
4. Discharging PlugMini EL
5. Demension1836118mm
6. Packing:Black/colorless PVC
7. Application: Ak series of Airsoft Gun.

[Sell] 11.1v 1500mah Lipo Airsoft Gun Battery

Fri, 23 Sep 2011 17:01:00 +0530

Specification:
1. Rated Capacity1500mAh
2. Voltage11.1V
3. Discharge Current15C
4. Discharging PlugMini EL
5. charging plugJST 4Pin
6. Demension6.520125mm
7. Application: M4 series of Airsoft Gun.