Tradeindia.com - Sell leads in Machinery

[Sell] Four Bin Feeder

Sat, 07 Nov 2009 17:25:00 +0530

Four Bin Feeder:

Hopper made from M.S. Plates of 5 mm thick and mounted on robust steel structure.
Load cell system is mounted under the gathering belt for weighing the Aggregate and Synchronization with Asphalt percentage.
Independent variable speed, synchronized drive under each bin with one feeder Vibrate system .
No flow indication system provided under each bin as per requirement.

For more details, contact us.

[Sell] Used Excavator Komatsu PC360

Sat, 07 Nov 2009 17:20:00 +0530

Model:KOMATSU PC360
Year:2006
Original paint and super clean machine
No accident or repair before
All in good working condition

For more details please contact us.

[Sell] Fpolystyrene Concrete Mixers

Sat, 07 Nov 2009 17:12:00 +0530

The universal mixer of viscous mixes and multicomponent mortars of COMPASS series, model COMPASS 1370 G SUPERMIX is a unique combination of simplicity and reliability , high mixing quality and universality, efficiency and accessibility.The universal mixer COMPASS 1370 G SUPERMIX, as a part of the concrete production line can make stiff moulding concrete, polystyrene concrete of different densities, non-active (dry) mortars without replacing of activator.The concrete mixers of COMPASS series are a part of the concrete plants intended to make concrete mix used in the production of paving tiles and building blocks, in the polystyrene mix production complexes, in the production lines of dry construction mixes

Technical characteristics:
Capacity:
- at manual loading, m/h 25
- at automatic loading, m/h 50
The operation cycle, min 0,5-1
Loading height, mm
Rotational speed of the tank, rev/min 0-30
Rotational speed of the activator, min, rev/min 0-60
Volume of the operating working tank, l 1370
Supply voltage, V 380
Installed power, kW 18
Weight, kg 1500
Overall dimensions (LBH),mm 264621621834

For more details please contact us.

[Sell] Drop Weight Tear Tester

Sat, 07 Nov 2009 17:12:00 +0530

We offer fully automatic PLC controlled DWTT (Drop Weight Tear Tester)

4 Models

1. PRTT 1500J; 15000 JULES CAPACITY

2. PRTT 3000J; 30000 JULES CAPACITY

3. PRTT 55000J; 55000 JULES CAPACITY

4. PRTT 80000J; 80000 JULES CAPACITY

We also Make:

Terminal, Handling and Testing Equipments for SAW/SPIRAL pipe plants,

We also offer following equipments

1. Pipe carriage/trolley for UT and X-Ray testing of pipes.
2. Pipe rotator,pipe conveyor,pipe transfer trolley,pipe lifting hangers and and work aids.
3. Welding booms, X -ray and UT boom and post bending rolls.
4. Pipe sizing press,online decoilers,plate flattners,/ levellers .and hydraulic shears.
5. Cut -to- length lines for HR/CR coils,with edge trimmers/slitters and scrap winders.
6. Coil handling equipments i.e. C hooks,coilgrab/tong,coil upender/downender,coil car, coiltransfer trolley,slab lifting tong etc.
7. Tube finning Machine and finned tube radiators/heat exchangers.

Please feel free to contact us.

[Sell] Cutting Equipment To Cut Foam Concrete

Sat, 07 Nov 2009 17:11:00 +0530

The universal cutting plant (URK) MASTER PLUS is intended to make wall and partition cellular concretes (foam concrete, gas concrete) The reached cutting accuracy helps to lay blocks on glue or thin-layer mortars.The cutting of foam concretes is carried out with help of special steel strings (saws) manufactured separately with use of the winding plant STRING 500. The light-weight concrete mix enters the portable metal moulds FORMBLOCK-MASSIVE specially developed to be used as a part of cutting system. The portable metal mold FORMBLOCK-MASSIVE used as a part of cutting complex is easy in operation. It takes 2-3 minutes to clean, grease, and assemble one metal mould The cellular (foam) concrete hardens (4-12 hours depending on the characteristics and mixing technology) at temperature 20-35. : Composition of the cutting complex URK MASTER PLUS
Nomination Quantity
Montage foundation frame 1
Unit of upper layer removal of the foam concrete mass 1
Carriage of mass cross cutting 1
Carriage of mass length cutting 1
Automatic control system chamber SAU LOGIC 1
Automation block of supply and positioning of the metal mould 1
Hydraulic station 1
Hydraulic mechanism of the metal mould supply 1
Transport route 1
Portable metal mould FORM BLOCK MASSIVE 1
The complementary equipment of the cutting plant URK MASTER PLUS
Nomination Characteristics
Gripping device for block displacement
Overall dimensions 130015001300 mm
max. lifting weight 1200 kg
Crossbeam for mould displacement
Metal moulds FORM BLOCK MASSIVE
Overall dimensions 14501450750
Installation to wind strings (saws) STRING 500
Rated power 0,9 kW,
supply voltage 220/380 V
Remote control board SAU URK LOGIC Overall dimensions 600500200 ,
power consumption 0,5 kW

For more details please contact us.

[Sell] Concrete & Mortar Pumps

Sat, 07 Nov 2009 17:10:00 +0530

The screw (gyratory) mortar pump SOSNA 4,6.500 is intended for pumping (pressure pumping) of the wet mortars, complex multicomponent mixes particularly sensitive to mechanical effects.The pumping of materials inclined to be disintegrated, that components have different densities (e.g. polystyrene concrete), sticky and abrasive masses, foam concrete mixes.The screw (gyratory) mortar pump is a volumetric self-priming pump. The operating mechanism of the pump is replaceable gyratory pair. The gyratory pair, in its turn, includes a elastic fixed coil, and screw rotor.

Technical characteristics
Capacity for mortar flow of 10 cm and more (specified in GOST 5802-86), m/h 4,6
Pressure, MPa 1,8 (18)
Practical pumping distance, m
- horizontal
- vertical
200
38
Hose diameter of pressure pipeline, mm 50
Rated power, kW 5,5
Type of circuit AC, three-phase
Frequency, Hz 50
Voltage, V 380
Hoppers volume, l 500
Maximum permissible dimensions of inclusions, max, mm 10
Rated overall dimensions (LWH), mm 18601320775
Weight, kg 125

For more details please contact us.

[Sell] Foam Concerte Mixing Plants

Sat, 07 Nov 2009 17:09:00 +0530

Mixing plant RBS 500(1000) HYACINTH is intended to mix foam concrete mortars of different density by method of separate preparation of mix components. The semi-automatic highly-productive foam generator is integrated in mixing complex. The application of mixers initially intended for the mixing of the heavy-weight concretes by the density of 2000 kg/m3, allows to say about considerable reliability reserve, as the preparation of the foam concrete mixers by the density about 600 - 800 kg/m3 renders considerably smaller loading on activator and mixers supporting units.

Technical characteristics
Marking of the complex RBS "HYACINTH" " - 500 RBS "HYACINTH - 1000
Overall dimensions, mm (LBH) 140012001750 175012001850
Volume of the working tank of the mixer, m 0,5 1
Model of the embedded foam generator TRITON 5 TRITON 5
Air pressure in the mixer at the foam concrete discharge, kg /cm2 0,65 0,65
Range of densities of the ready foam concrete, kg /m3 300-1400 300-1400
Order of foam, min 14 14
Range of foam adjustment, gram/liter 20-300 20-300
Capacity, m 3/h Up to 5 Up to 10
Weight in the non loading state, kg 800 950
Attending personnel, persons 1 1
Power consumption, kW 7,5 11
Tension of the power circuit, V 380 380

For more details please contact us.

[Sell] Mobile Foam Concrete Mixers

Sat, 07 Nov 2009 17:09:00 +0530

The mobile universal foam concrete mixer NAVIGATOR V3 EXPRESS by production of machine building enterprise Stroymechanika is intended to mix foam concrete of density of 300 - 1600 kg/m3 and to convey it to pouring place. It helps to underpour floors and ceilings, fill construction hollows on the building sites., a mixer should have a minimal weight to move easily through building site, but in this case the intensity of use of the mobile equipment is much higher than the working load of the stationary plants.

Technical characteristics
Overall dimensions, mm (LBH) 1700 1900 2400*
Volume of working tank, l 500
Weight, kg 560
Power consumption, kW 7,5
Working air pressure, kg/cm 0,65
Capacity, m/h 4,5
Supply-line voltage, V 380
Distance of mortar supply, m
- horizontally
- vertically
20
5
Radius of the wheel disks R14

For more details please contact us.

[Sell] Detroit Filters

Sat, 07 Nov 2009 16:55:00 +0530

Quanzhou Jemewish Machine & Equipment Company supplies original and replacement parts of DETROIT filters with good quality assurance and timely delivery all the year.
The DETROIT filters we have in stock are follows : 23530646, 23533816, 23529168, 23530407, 26530573, 23530706, 23530707, 23533816, 5241800310, 23518667, 23530411, 23518481, 23518482, 23518528, 23518532, 23527003, 23514654, 23530642, 23518528, 23530643, 23518532, 23530707, 23518525, 23518667, 23530537, 23518480.

Welcome to inquire us.

[Sell] PASSAT 200 PM (PMSh)

Sat, 07 Nov 2009 16:52:00 +0530

The expander PASSAT 200 PM (PMSh) The expander PASSAT 200 unites all the required devices and units components on one frameis intended to expand polystyrene granules in the production lines of expanded polystyrene (expanded foam) and polystyrene concrete. The expander PASSAT 200 PM (PMSh) has a built in low-power steam generator (15 kW) unlike steam generator offered on the market those power is 50-150 kW.The equipment and devices applied in the expander PASSAT 200, provide the opportunity to mechanize as much as possible the expansion of polystyrene granules.The expander of polystyrene granules of PASSAT series are equipped with optional screw feeder of first expanded polystyrene granules supply to be processed again with saturated water steam.

Technical characteristics
Characteristic PASSAT 200 PM PASSAT 200 PMSh
Overall dimensions (LWH), mm* 11008001900 17008001900
Weight of the expander, kg 260 310
Power consumption, kW 16,9 17,6
Power supply, V 380 380
Volume of heat processing chamber, l 200 200
Volume of raw material hopper, l 35 35
Capacity, m/shift (density 15 kg/m) 20** 20**

[Sell] Hardware Fittings

Sat, 07 Nov 2009 16:16:00 +0530

Shenzhen Yongmengsheng Hardware Products Factory is a leader manufacturer of hardware fittings, accessories of limber hook up for logistics(Plastic coated pipe system) and Lean products. There is a specialized team in our factory, and we always engage to study, design and manufacture of limber hook up system(Plastic coated pipe system), manufacture accessories of limber hook up for logistics(Plastic coated pipe system), electron, electrical appliances, and hardware fittings of machines as well.

[Sell] Pet Bottles Sheets Recycling Production Line

Sat, 07 Nov 2009 16:15:00 +0530

The production line is mainly used for recycling waste PET bottles, films and scrap etc, after crushing, cleaning, dehydration, drying, obtains the clean PET fragment which can be used later for granulating.
The production line uses the stainless steel material, the automatically is high, the operation is simple and convenient.

[Sell] SRL-Z Series Mixing Unit

Sat, 07 Nov 2009 16:14:00 +0530

Applications and characteristic:
The unit is used in mixing,drying,coloring process of all kinds of plastics,is ideal auxiliary equipment for producing plastic profile and pipe.
The main axle sealing device attains the national monopoly,hot-mixer has self-friction ,electric heating and steam heating modes.The pot cover adopts double-sealing,and both are arch covers,is not easy to distort.The mixing blades are made of stainless steel,they have passed the test of dynamic balance and static balance.It can adapt the pulse dust collection device.

[Sell] HXZ Series Plastic & Chemical Fiber Pelleter

Sat, 07 Nov 2009 16:14:00 +0530

The machine adopts the principles of grinding rapidly,agitating continuously,milling and fractioning to be heated with multi-knives and cooling and contracting express,produces granules from waste materials and leftover materials such as the plastic films,filament,ribbons,sheets,soft plastic pipes,foaming materials, and degrading materials, and then puts them into reproduction.It is the latest ideal granulating equipment to recycle plastics and reproduce.
Characteristic:
1,Small area of the machine 2,Mechanical structure is simple and easy to use 3,Does not destroy the molecular structure of materials, not damage the physical performance.

[Sell] Granule Filling Machine

Sat, 07 Nov 2009 15:58:00 +0530

Granule filling machine is also called as cup filler, which is best suitable for granular products.

[Sell] Pickle Filling Machine

Sat, 07 Nov 2009 15:58:00 +0530

Pickle filling machines are specially designed for filling pickled products. It can handle products which are viscous in nature having chunks in it.

[Sell] Powder Filling Machine

Sat, 07 Nov 2009 15:57:00 +0530

It is also known as auger filling machines, which can handle powders of any nature. It can handle hygroscopic and non hygroscopic powders with high levels of accuracy.

[Sell] Viscous Filling Machine

Sat, 07 Nov 2009 15:57:00 +0530

These machines are used for filling products which have viscosity. Best suitable for products such as cosmetic creams, dairy products, lubricants, adhesives etc.

[Sell] Liquid Filling Machine

Sat, 07 Nov 2009 15:57:00 +0530

Liquid filling machine manufactured by us is of two variants - semi automatic and automatic multiple heads. These machines can handle liquids with high levels of accuracy. Suitable for all types of liquids, even for liquids which foam during filling.

[Sell] Hammer Crusher

Sat, 07 Nov 2009 15:56:00 +0530

Hammer Mill Application:
The hammer crusher also named hammer mill, which is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc. The PC-Hammer crusher is suitable for both dry and wet crushing of brittle, medium-hard materials for the mining, coal, metallurgic, construction material, road building, and chemical industries. the maximum, compressive resistance of the crushed materials can be up 150Mpa.
it crushes by the collisions between high-speed hammer and materials, has features of simple structure, high reduction ration, high efficiency, etc.

Features of hammer crusher
1. It is of various types.
2. It is suitable for crushing maximum, medium and minimum stones.
3. It is easy to be operated.

Usage range of our hammer crusher
Our hammer crusher (hammer mill) series products are applicable for various hard and fragile materials, such as limestone, coal, salt, gypsum, alum, brick and tile, etc. the crushing compressive strength of materials should not be in excess of 150Mpa. The hammer crusher is mainly used in such industries as cement, coal separation, electricity generation, building materials and compound fertilizer, etc. The hammer crusher can crush materials with different sizes into equal particle, which favors the next procedure. The hammer crusher has the advantages of reliable mechanical structure, high productivity and favorable applicability.