Tradeindia.com - Sell leads in Laser Cutting Machines

[Sell] Gizmocut Laser Cutting Machines

Thu, 24 May 2012 12:05:00 +0530

IDI Laser Services Pte Ltd (IDI) is proud to present GizmoCut - the High Power Fiber Laser Sheet Metal Cutting System in addition to existing Razor Series of High Power CO2 Laser Cutting System. We offer working area suitable to all Sheet Metal Processing needs of 900mm x 600mm. Larger working area is available on special request.

Structure & Safety:
GizmoCut is well designed with operating panel placed ergonomically. The system has got 4-sides safety enclosure and 3-sides open in marking at loading and unloading area. Structurally, it is designed to withstand heavy loads and damping along with aesthetic of the machine. Fiber laser is also safer for operator, as it is not absorbed as easily by human body like CO2 Lasers.
Sheet Loading & Clamping:
The working table is pneumatically actuated loader with ball on the top of it for easy sliding of the sheet as well as pneumatically controlled firm clamping on the sheet. The position of the clamp on the table can be adjusted to suit different material. The system promotes safe loading and clamping for operator who is loading and unloading the sheet.
Low Operating Cost.
The Reliability of fiber lasers and our software greatly reduces the impact on your budget. IDI offers value beyond just the purchase price. We give complete warranty that covers all parts on the system, the highest quality components for less maintenance and replacement lost over time, and the latest laser technology for the highest quality, quickest marking available.

[Sell] Trotec Brand Laser Marking

Tue, 22 May 2012 10:13:00 +0530

Trotec Speedy 100, 300, 500, 1500 and Rayjet Range of Laser machines are the fastest and most productive systems on the market. The performance of the motion systems has been improved so that a top speed of 355cm/sec., or 140 inches/sec., with an acceleration of 5 g can be achieved.

Your benefit: You can produce 30% 100% more than with competitive systemsevery daywithout sacrificing quality and this translates to higher profits. Better performance combined with the highest possible quality at prices that are surprisingly affordable. Performance, productivity, quality and reliability add up to a lower total cost of ownershipthis means value when you choose Trotec.

InPack-Technology is a combination of the highest quality components for ultra long lifetime combined with protection of the optics and all sensitive components. Trotec systems are designed for minimal wear-and-tear. The design and manufacturing quality standards make sure your Trotec Laser will be ready for years of trouble free, heavy-duty production.

Offers solution for all your Laser Engraving, Marking and Cutting needs of your business such as

Architectural Modelmakers
Automotive and Aviation Industry
Awards and Trophies
Educational Institutions
Electronics and Electrical Industry
Food Industry
iPhone & iPad Engraving
Medical Industry
Packaging Materials
Promotional Items
Signage & Display
Signs
Stamp engraving
UID - Unique Identification

On a Wide Range of Materials

Acrylic
Plastics
Rubber
Laminates
Paper
Veneer
Leather
Wood
Cardboard
Textiles
Glass and many more

Please visit www.troteclaser.com for a tour of all the products

Please contact A Shabbir Ahmed on 093425-38555 for more information.

[Sell] Laser Profile Cutter

Sat, 19 May 2012 18:25:00 +0530

The Laser Profile Cutter is an high speed production line machine whic is used to cut material like M.S, S.S etc.

APPLICATION OF LASER CUTTING MACHINE IS AS FOLLOW:

1) Job & Machine Shop Application

2) Automotive Industries

3) Aerospace Industries

4) Metal Profile Art Work

5) Machine Manufacturer

6) Sheet Metal Application

7) Fabrication Work

8) Defense

ADVANTAGE OF LASER CUTTING MACHINE:

1) CO2 SEALED SLAB Laser Technology.

2) Laser Pre-mix Gas Bottles Not required. Saves cost and Space.

3) No Pre Heating required prior to start.

4) 48 months Pro Rata WARRANTY.

5) After refilling your warranty extends to another 48 months (Same as new machine)

6) Low operating cost (160 Rs. per Hour Approx.)

7) No moving Parts, less maintenance.

8) Low standby power consumption.

9) We provide meniscus focusing lenses.

[Sell] CNC Laser Cutting Table

Wed, 16 May 2012 21:20:00 +0530

APPLICATION OF LASER CUTTING MACHINE IS AS FOLLOW:
1) Job & Machine Shop Application
2) Automotive Industries
3) Aerospace Industries
4) Metal Profile Art Work
5) Machine Manufacturer
6) Sheet Metal Application
7) Fabrication Work
8) Defense
ADVANTAGE OF LASER CUTTING MACHINE:
1) CO2 SEALED SLAB Laser Technology.
2) Laser Pre-mix Gas Bottles Not required. Saves cost and Space.
3) No Pre Heating required prior to start.
4) 48 months Pro Rata WARRANTY.
5) After refilling your warranty extends to another 48 months (Same as new machine)
6) Low operating cost (160 Rs. per Hour Approx.)
7) No moving Parts, less maintenance.
8) Low standby power consumption.
9) We provide meniscus focusing lenses.

[Sell] SH-K40 Laser Machine

Wed, 16 May 2012 08:39:00 +0530

1. Model: SH-K40 Laser engraving machine for stamp
2. Applicable Materials
Various non-metal materials,such as rubber, acrylic, plexiglass, bowlder, crystal, wood, plastic etc.
3. Applicable Industry
(1). Mainly used for engraving of non-metal materials: such as rubber, ox horns, wood,plexiglass, atomic materials, crystal,bowlder, etc..
(2). Applying for processing of small-size artistic products. For the engraving of patterns and characters on rubber, wood board, bamboo piece,organic glass plank and cloth.The patterns and characters engraved are real to life and pleasing to the eye.
(3). For the engraving of titles, types,signs, patterns etc. On electronic parts, which will last for long time.

4. Technical Parameters
Laser Power 40W
Power Supply AC22010% 50HZ/AC11010 60HZ
Operating Temperature 5-35
Max Engraving Area 300x200(mm)
Max Area for stamp 200x100(mm)
Software Moshi/Newly draw/Newly seal(optional)
Working Speed 0-10mm/s,0-30mm/s,0-50mm/s
Package Plywood case
Machine Dimension 800x500x250(mm)
Package Dimension 970x670x400(mm)
Net Weight/Gross Weight 28kg/45kg.

[Sell] Laser Engraving Cutting Equipment

Wed, 09 May 2012 07:33:00 +0530

Features:

1. Laser Engraving Machine adopts the new high-efficiency laser tube, the laser beam is more stable than the traditional type,and the life time of the laser tube can be over 10000 hours.
2. The mechanical structure is strong and stable, making the machine to run at high precision.
3. The electrical ability is stable, the engraving speed is high, and the precision is high.
4. Advanced DSP control system, professional motion control chip, consecutive high speed curve cutting and the shortest path selection function improve the working efficiency a lot.

Specification:

Model : ZQ9060

Working area: 900mm*600mm

Laser power: 60w

Laser type: CO2 Sealed laser tube , 10.6m, water-cooled

Cooling type: Water chiller

Engraving speed: 0-60000mm/min

Cutting speed: 0-50000mm/min

Total power: 2KW/H

Laser output control: 0-100% set by software

Min. engraving size: Chinese: 2.0mm*2.0mm
English letter: 1.0mm*1.0mm

Highest scanning precision: 4000DPI

Locating accuracy : +0.01mm

Controlling software: DSP control system

Graphic format supported : DST PLT BMP DXF DWG AI LAS,etc

Compatible software : CORELDRAW,PHOTOSHOP, AUTOCAD,TAJIMA,etc.

Color separation: Yes

Drive system: High-precision 3-phase stepper motor

Auxiliary equipments
Exhaust fan and air exhaust pipe, red-dot position system, focus lens & reflection mirrors.

Power supply: AC220V/60HZ

Working environment: Temperature:0-45, Humidity 5-95%(No condensate water)

Packing size: 1.6m*1.26m*1.46m

Net weight: 360KG

Applicable industry:
Mould industry (construction mould, aviation and navigation mould, wooden mould), advertising, decoration,
arts and crafts, electronics, electric appliances, etc.

Applicable Materials:
Materials such as acryl, wood planks(light planks,candlenut wood),bamboo ware, double color board, paper,

[Sell] Laser Cutting Machine

Mon, 07 May 2012 16:24:00 +0530

Equipment Performance:

Moduled steel frame structure to reduce the mechanical trouble effectively, imported straight track to support motion,step or servo-motor system, route way feeding, alternate striped worktable. Circulation water cooling,hydraulic protection control system, huff protection control system, the device of exhaust smoke and dust.Invariable laser path(patent of sunic) is applied in the machine, simple operation with the control panel of touch LCD screen work normally without computer.The machine can cut the workpiece smoothly and elaborately by the big worktable, simple laser path system, excellent control system,particularity exact engraving.

Applicable fields:

Advertising industry, decoration, furniture, model manufacturing, and handcraft industry. The machine is widely applied in the fine engraving, cutting and hollowing out on nonmetallic materials with all kinds of characters, graphs, images, trademarks and so on.

[Sell] Laser Cutting Source

Fri, 04 May 2012 21:04:00 +0530

We can provide you the world best laser cutting source of Rofin Sinar for Cutting materials like M.S, S.S etc.Laser Cutting Machine works on the principle by heating the material at the focal point of the focused laser beam above its melting point. The resulting molten material is ejected either by a coaxial gas jet or the induced vapor pressure, thus forming the cut kerf.

Laser cutting is applied for different kinds of materials like Stainless Steel, Mild Steel, and Aluminum etc. where it require precise, fast and force-free processing. Lasers create narrow kerfs and thus achieve high-precision cuts. Compared to alternative techniques like die cutting, laser cutting is cost-efficient already for small-batch production.

APPLICATION OF LASER CUTTING MACHINE IS AS FOLLOW:

1) Job & Machine Shop Application

2) Automotive Industries

3) Aerospace Industries

4) Metal Profile Art Work

5) Machine Manufacturer

6) Sheet Metal Application

7) Fabrication Work

8) Defense

ADVANTAGE OF LASER CUTTING MACHINE:

1) CO2 SEALED SLAB Laser Technology.

2) Laser Pre-mix Gas Bottles Not required. Saves cost and Space.

3) No Pre Heating required prior to start.

4) 48 months Pro Rata WARRANTY.

5) After refilling your warranty extends to another 48 months (Same as new machine)

6) Low operating cost (160 Rs. per Hour Approx.)

7) No moving Parts, less maintenance.

8) Low standby power consumption.

We provide meniscus focusing lenses.

[Sell] Sh-G350D Laser Engraving Machine

Fri, 04 May 2012 17:29:00 +0530

1.Model:SH-G350D Laser Engraving Machine
2.Applicable Materials
Plastic,wood,jade,crystal,rubber,plexiglass and other non-metal materals.
3.Applicable Industry
Mainly used for the engraving and cutting of little artistic works,such as engraved portraits,badges,breast cards and various engraved packages etc..
4.Technical Parameters:
Laser Power 50W(optional)
Laser Type Hermetic CO2 glass tube
Power Supply AC22010% 50 HZ/AC11010% 60HZ
Working Area 500mmx300mm--19x12
Max Moving Speed 0-60000mm/min
Worktable up&down worktable/fixed worktable(optional)
Locating Precision <0.01mm
Min Shaping Character character:2x2mm, letter:1x1mm
Operating Temperature 5-35
Resolution Ratio 4500dpi
Control Configuration DSP
Data Transfer Interface USB(offline)
System Environment WINDOWS 2000/WINDOWS XP/Visa/win7
Cooling Way water cooling and protection system
Graphic Format Supported files which CorelDraw,Photoshop, AutoCAD can identify
(BMP,GIF,JPGE,PCX,TGA,TIFF,PLT,CDR,DMG,DXF,PAT,CDT,CLK,DEX,CSL,CMX,AI,WPG,WMF,EMF,CGM,SVG,SVGZ,PCT,FMV,GEM,CMX)
Compatible Software CorelDraw, AutoCAD
Cutting Thickness 010mm(depends on different materials)
Color Separation separation of cutting up to 256 colors
Sloping Engraving Yes,slope can be designed discretionarily
Cuts off the water supply the protection Yes
Net Weight 78kg/82kg
Gross Weight 90kg/105kg
Machine Dimension 1020x650x590(mm),1020x650x630(mm)
Package Dimension 1140x770x550(mm),1140x770x670(mm)
Optional Parts High-grade cooling system/imported focus lens/cylinder rotary attachment/irregular rotary attachment.

[Sell] Laser Scribing Machine

Thu, 03 May 2012 16:28:00 +0530

Model Name GSC-50K
Laser wavelength 1064nm
Laser power 50W
Scribing width 50m
Scribing speed 100mm/s
Scribing accuracy 10m
Working area 350x350mm
Temperature control precision 0.5
Working power 380V(220V)/50Hz/5kvA
Working table negative pressure absorbing and dust elimination
Cooling method unified rotative homothermal water cooling
Control mode Common

[Sell] CO2 Laser Engraving Machine

Wed, 02 May 2012 15:35:00 +0530

This CO2 laser engraving machine is working with galvanometer, it is totally different with the ball screw type CO2 laser cutting machine, this CO2 laser engraving machine is working on very high speed and high accuracy, it can be meet some industries where require high quality engraving.

In addition, this machine does not require much effort for maintenance, is easy to operate and highly durable. The key function of this machine is to carve permanent marks such as letters, figures, graphs or bar codes.

We offer a wide range of Engraving machines which are used for engraving & cutting applications. Our manufactured machines are mainly applicable in processing non-metallic materials such as Acrylic, Plastic, Wood, Paper, granite, glass etc.

Feel free to contact us.

[Sell] CNC Laser Cutting Machine

Wed, 02 May 2012 15:32:00 +0530

CNC Laser Cutting Machines are used to cut material such as mild steel, stainless steel, and Aluminium in an extremely economical and fast way. It provides accuracy and at the same time, gives freedom to our designers to design any intricate shape, since the cutting will not lead to distortion.

These are procured from the trusted and reliable sources of the market. They manufacture these machines using high grade raw material. Moreover, the quality is also being checked at the vendor's end.

These are basically designed to cut wood and used in wood industries and signage industries as well. With these machines, we can cut material exactly in the shape demanded by the clients.

Please contact us for more details.

[Sell] Laser Cutting System SP1500

Mon, 30 Apr 2012 15:55:00 +0530

Profitability: The combination of highest productivity,working area in standard plate dimensions,longest system lifespan and lowest maintenance costs yields an unbeatable equation that makes the SP1500 the most profitable CO2 laser cutting and engraving system in its class.

Overview:
Working area(59"x49")1500x1250mm
Laser power from 60W to 400W "Sealed" CO2 laser
Closed laser system
Cutting table system with cross-flow ventilation
Trotec IPC - Intelligent Path Control
Traveling exhaust
Pass-through function
Closed processing interior with Trotec - "InPack Technology"
Air-cleaned optics
Maintenance-free brush less servomotors
troCAM CAD/CAM software
JobControl Job Management software
"Cut" CCD camera, Registration Mark Recognition and Compensation System

Your Profit:
The increasing demands on material processing quality,flexibility in production and highest-possible output with ongoing cost and price pressures,are the challenges faced by all successful companies. Whether plastic processing,wood processing or print finishing or involving sheet printing or sheet products,profitable materials processing requires a cutting system that can match changing demands.

With its 400W laser power SP1500 is perfectly geared up for any application from acrylic processing and woodworking to textile or membrane switch cutting. Service free motors,linear bearings and optics included. Designed for more output,higher performance and high demanding production.

The SP1500's concept of a closed laser system with a closed machine interior and high efficient fume extraction gives the SP1500 the base for laser safety and easy integration any production setting without any costly laser safety precautions.

Technical Details:
Machine Dimensions(111"x78"x51")2829x2000x1300mm
Material Dimensions(66" x 62")1700x1600mm
Material Height(3.9")100mm
Speed(65"/sec)165 cm/sec
Acceleration 1g
Weight 1200kg
Accuracy +/- 0.1mm
Addressable Accuracy Encoder +/- 0.001mm
Static Repetitive Accuracy <+/- 0.15

[Sell] Auto-Feeding Laser Cutting Machine

Mon, 30 Apr 2012 11:13:00 +0530

ZQ1690D Double Heads Auto-feeding Laser Engraving Cutting machine

Features:
1. Laser Engraving Machine adopts the new high-efficiency laser tube, the laser beam is more stable than the traditional type, and the life time of the laser tube can be over 10000 hours.
2. The mechanical structure is strong and stable, making the machine to run at high precision.
3. The electrical ability is stable, the engraving speed is high, and the precision is high.
4. Advanced DSP control system, professional motion control chip, consecutive high speed curve cutting
and the shortest path selection function improve the working efficiency a lot.
5. Import Linear guide & High-speed stepper motor/drivers; the cutting edges were all smoothly.

Specification:
Double Heads Laser Engraving&Cutting Machine is the new model, it is
developed from the original dual head laser machine to meet the requirements of clients, we researched and developed the software which completely solves the problem that the distance between the two laser heads can not be altered or have to be changed manually. With this machine you can control the distance between the laser heads by changing the data of the software easily.

The unique interactive design of the machine allows the free switch between single laser head work and double laser head work. Equipped with red light positioning device, accurately indicate the optical processing position, save artificial positioning of the trouble.
The machine has well comparability for many different software's, and it also supports completely off-line work.

Model
ZQ1690D

Working area
1600mm*900mm

Laser power
100w*2

Laser type
CO2 Sealed laser tube, 10.6m, water-cooled

Cooling type
Water chiller CW5202

Engraving speed
0-60000mm/min

Cutting speed
0-50000mm/min

Total power
2KW/H

Laser output control
0-100% set by software

Min. engraving size
Chinese: 2.0mm*2.0mm)

[Sell] Double Heads Laser Cutting Bed

Mon, 30 Apr 2012 11:08:00 +0530

ZQ1325D Double Heads Laser Cutting Bed

Features:

1.The Auto Feed Laser Engraving Machine is typically designed for engraving cloth rolls and it adopts the new high-efficiency laser tube, the laser beam is more stable than the traditional type,and the life time of the laser tube is more than 8000 hours.
2.Compared with the ordinary laser machine, this type machine adopts more scientific design and high-strength steel-frame structure, which increase the fuselage strength more than 40% to prevent the machine from distortion during long term work.
3.The humanized and modern appearance makes the operation and maintenance quite easy.
4.Advanced DSP control system, professional motion control chip, consecutive high speed curve cutting and the shortest path selection function improve the working efficiency a lot.
5.With red light positioning device accurately indicates the location of the processing of the laser head, eliminate the trouble about manual positioning.

Features:

ZQ1325D

Working area
1300mm*2500mm

Laser power
130w*2

Laser type
CO2 Sealed laser tube , 10.6m, water-cooled

Cooling type
Water chiller

Engraving speed
0-75000mm/min

Cutting speed
0-50000mm/min

Total power
2KW/H

Laser output control
0-100% set by software

Min. engraving size
Chinese: 2.0mm*2.0mm English letter: 1.0mm*1.0mm

Highest scanning precision
4000DPI

Locating accuracy
+0.01mm

Controlling software
DSP control system

Graphic format supported
DST PLT BMP DXF DWG AI LAS,etc

Compatible software
CORELDRAW,PHOTOSHOP, AUTOCAD,TAJIMA,etc.

Color separation
Yes

Drive system
High-precision 3-phase stepper motor

Auxiliary equipments
Exhaust fan and air exhaust pipe, red-dot position system, focus lens & reflection mirrors. Auto-feeding device

Power supply
AC220V/60HZ

Working environment
Temperature:0-45, Humidity 5-95%(No condensate water)

[Sell] Laser Cutter Speedy 500

Mon, 30 Apr 2012 10:14:00 +0530

The Speedy 500 is the ideal CO2 laser cutting and engraving system for those who process large surface materials and need high speeds and precision. The Speedy 500 is more flexible and productive than any other laser in its class.

Overview:
Working area(49" x 28")1245 x 710 mm
Laser power ranging from 60W to 200W "Sealed"CO2 laser
Closed Laser System
Mulch-Function Table Concept
Traveling exhaust
Pass-Through
Sealed Interior Components with Trotec In Pack Technology
300mm Electronically Controlled, Z-Axis
Air-flushed Optics
Maintenance-Free military grade Brush less Servomotors
troCAM CAD/CAM Software
Job Control Job Management Software
"i-cut" CCD Camera, Registration Mark Recognition and compensation system

Your Profit:
The Speedy 500 offers room for standard material sizes, from plastics, textiles, wood, paper and more. Despite the large working area, every corner of the interior is easy to access.

More jobs in the same time. The Speedy 500 works productively right from the start. It produces high quality engraving and cutting results on a wide variety of materials at very high processing speeds and acceleration rates.

More tables more possibilities. Its unique multifunctional table concept enables optimal configuration for all cutting and engraving applications depending on specific job requirements users can select between an engraving table,cutting table,honeycomb table or vacuum table. The machine's pass-through capability enables processing of very long and bulky parts.
A fully enclosed machine interior, the Trotec patented In Pack' Technology,industrial grade components and air-flushed optics guarantee maintenance-free operation and endless production.

Technical Details:
Machine dimensions(75"x49"x45")1920 x 1240 x 1140mm
Material size(55"x32")1420 x 820mm
Material height(5.9"/11.8")150/300mm on basic table
Speed 254cm/sec
Acceleration 2g
Weight 520-580kg
Accuracy +/- 0.1
Addressable accuracy encoder +/- 0.0046
Static repetitive accuracy <+/- 0.15

[Sell] Laser Cutting Machine

Sat, 28 Apr 2012 18:59:00 +0530

1.Imported and domestically produced high-quality 200W, 280W, 300W DC-type CO2 glass laser tube;
2.No need pre-heat, no start up costs, can be worked while start, low energy consumption;
3.High quality precision screw rail transmission system;
4.Importing Japanese Mitsubishi / Panasonic servo drive system;
5.Contact-type automatic focus system.

[Sell] Laser Cutting Bed

Sat, 28 Apr 2012 18:57:00 +0530

Features:

1)Japanese technical engine running, making sure the products to run at high aped and high precision.

2) The original binding beeline lead rail, the mechanic is running well and stable.

3) Channel feeding, the feeding can be unlimited.

4) The body of the machine adopts high quality aluminum, professional model and has the specification of strong and not easy for distortion.

5) The main parts of the electrical line adopts the imported materials, the mainly controlled CMOS chip adopts double face CPU.

Applicable materials:

Non-metal materials such as acrylic, double color board, Plexiglas, Common glass, bamboo and wood, rubber, marble, granite and tiles, leather cloth etc.

Applicable industries:

Advertising industry, Billboards, artistic gifts, crystal ornaments, paper-cut, bamboo and wooden product, garment and leather, embroidery, decoration and upholster industry.

Technical parameters:

Model
ZQ1325L

Working area
1300*2500mm

Laser power
100W(130W)

Laser type
Sealed co2 laser tube,10.6m, water-cooled

Cooling type
Circulating Water chilling system

Engraving scanning speed
060000mm/min

Cutting speed
040000mm/min

Interface
USB

Cutting thickness
0-25mm

Software
Laser Cut 5.3

Operating temperature
0-45C

Operating humidity
5-95%

Laser output control
0100% software setting

Smallest character engraving
English 1.0mm*1.0mm

Highest scanning precision
4000DPI

Locating precision
+0.01mm

Gross power
1000W

Controlling software
DSP control system

Graphic format supported
DST PLT BMP DXF DWG AI LAS,etc

Compatible software
TAJIMA CORELDRAW, PHOTOSHOP, AUTOCAD, All type of AUTOCAD sofeware in cloth

Color separation
Yes

Drive system
High-precision 3-phase stepper motor(DC0.8A 24A)

Auxiliary equipments
Exhaust fan and air exhaust pipe, air compressor.

[Sell] Trotec Speedy 100 - Laser Engraver

Sat, 28 Apr 2012 14:13:00 +0530

The entry level Laser Engraver Speedy 100: The Compact, High Production CO2 Laser Engraver
Purchase what you need now, and upgrade as necessary.

Overview:
Working area(24" x 12") 610 x 305 mm
Laser power ranging from 12W to 45W "Sealed" CO2 laser
Closed Laser System
Sealed Interior Components with Trotec InPack-Technology
Electronically Controlled Z-Axis
Maintenance-Free Brushless Servomotors
Job Control Software

Your Profit:
Our Speedy 100 CO2 laser engraver offers a compact, entry-level solution carefully designed to meet the evolving laser engraving and laser cutting needs of growing businesses. The Speedy 100 is totally scalable in terms of software, performance, and laser power. And it carries the Trotec family genes: top quality, unmatched performance, and technological leadership. Speedy 100 is a small business investment today that will pay off big tomorrow.

Your benefit: Speedy 100 laser engraver is the fastest laser in its class. The speed of the entry level unit can be optionally advanced through an upgrade at any stage. And the extraordinary quality in terms of engraving and cutting will continue to remain on the same top level.

InPack-Technology is a combination of the highest quality components for ultra long lifetime combined with protection of the optics and all sensitive components. Our systems are designed for minimal wear-and-tear. It all adds up to a lower total cost of ownership over the lifetime of each Speedy 100 laser system.

Technical Details:
- Working area (24" x 12") 610 x 305 mm
- Machine dimensions (38.3" x 30.1" x 18") 974 x 765 x 457 mm
- Material size (24" x 12") 610 x 305 mm
- Material height (6.7") 170 mm
- Laser power ranging from 12W to 45W "Sealed" CO2 laser
- Speed (70 - 110 /sec) 180 - 280 cm/sec

[Sell] Speedy 300 Flatbed Co2 Laser Engraver

Sat, 28 Apr 2012 14:00:00 +0530

Speedy 300 CO2 flatbed laser engraver is a premium-class laser engraver. This CO2 flatbed laser engraver can be used as a laser engraver or laser cutting machine. This laser engraver contains the most innovative design and components of the best quality. The Speedy 300 flatbed laser engraver provides precision and the highest productivity in laser engraving and laser cutting, over a span of many years.

Overview:
Working area (29" x 17") 726 x 432 mm
Laser power ranging from 12W to 120W "Sealed" CO2 laser
Closed Laser System
Sealed Interior Components with Trotec InPack-Technology
Electronically Controlled Z-Axis
Maintenance-Free Brushless Servo motors
JobControl Job Management Software
troCAM CAD/CAM Software
standard warranty of 3 years

Your Profit:
Our lasers are the fastest and most productive systems on the market. The performance of the motion systems has been improved so that a top speed of 355cm/sec., or 140 inches/sec., with an acceleration of 5 g can be achieved.

Your benefit: You can produce 30% to 100% more than with competitive systems every day without sacrificing quality and this translates to higher profits. Better performance combined with the highest possible quality at prices that are surprisingly affordable. Performance, productivity, quality and reliability add up to a lower total cost of ownership this means value when you choose us.

InPack-Technology is a combination of the highest quality components for ultra long lifetime combined with protection of the optics and all sensitive components. Our systems are designed for minimal wear-and-tear. The design and manufacturing quality standards make sure your Speedy 300 will be ready for years of trouble free, heavy-duty production.

Technical Details:
Machine dimensions(42.9" x 35" x 23.2") 1090 x 890 x 590 mm
Material size(29" x 17") 726 x 432 mm
Material height(7.8") 200 mm
Speed 355 cm/sec
Acceleration 5g
Addressable accuracy
Static repetitive accuracy

[Sell] Mini Laser Engraving Machine

Sat, 28 Apr 2012 13:16:00 +0530

Model
ZQ6040

Working area
600mm*400mm

Laser power
60w

Laser type
CO2 Sealed laser tube , 10.6m, water-cooled

Cooling type
Water chiller

Engraving speed
0-60000mm/min

Cutting speed
0-50000mm/min

Total power
2KW/H

Laser output control
0-100% set by software

Min. engraving size
Chinese: 2.0mm*2.0mm English letter: 1.0mm*1.0mm

Highest scanning precision
4000DPI

Locating accuracy
+0.01mm

Controlling software
DSP control system

Graphic format supported
DST PLT BMP DXF DWG AI LAS,etc

Compatible software
CORELDRAW,PHOTOSHOP, AUTOCAD,TAJIMA,etc.

Color separation
Yes

Drive system
High-precision 3-phase stepper motor

Auxiliary equipments
Exhaust fan and air exhaust pipe, red-dot position system, focus lens & reflection mirrors.

Power supply
AC220V/60HZ

Working environment
Temperature:0-45, Humidity 5-95%(No condensate water)

Packing size
1.65m*1.26m*1.46m

Net weight
400KG

[Sell] Laser Cutting machine for acrylic

Sat, 28 Apr 2012 13:16:00 +0530

Features:

1. Laser Engraving Machine adopts the new high-efficiency laser tube, the laser beam is more stable than the traditional type,
and the life time of the laser tube can be over 10000 hours.
2. The mechanical structure is strong and stable, making the machine to run at high precision.
3. The electrical ability is stable, the engraving speed is high, and the precision is high.
4. Advanced DSP control system, professional motion control chip, consecutive high speed curve cutting
and the shortest path selection function improve the working efficiency a lot.
5. Import Linear guide & High-speed stepper motor/drivers; the cutting edges were all smoothly.

Specification:

Model
ZQ1290D

Working area
1200mm*900mm

Laser power
80w*2

Laser type
CO2 Sealed laser tube , 10.6m, water-cooled

Cooling type
Water chiller

Engraving speed
0-60000mm/min

Cutting speed
0-50000mm/min

Total power
2KW/H

Laser output control
0-100% set by software

Min. engraving size
Chinese: 2.0mm*2.0mm English letter: 1.0mm*1.0mm

Highest scanning precision
4000DPI

Locating accuracy
+0.01mm

Controlling software
DSP control system

Graphic format supported
DST PLT BMP DXF DWG AI LAS,etc

Compatible software
CORELDRAW,PHOTOSHOP, AUTOCAD,TAJIMA,etc.

Color separation
Yes

Drive system
High-precision 3-phase stepper motor

Auxiliary equipments
Exhaust fan and air exhaust pipe, red-dot position system, focus lens & reflection mirrors.

Power supply
AC220V/60HZ

Working environment
Temperature:0-45, Humidity 5-95%(No condensate water)

Packing size
2.43m*1.78m*1.34m

Net weight
500KG

Applicable industry:
Mould industry (construction mould, aviation and navigation mould, wooden mould), advertising, decoration, arts and crafts, electronics, electric appliances, etc.

[Sell] Leather Laser Cutter (CE FDA)

Sat, 28 Apr 2012 13:15:00 +0530

ZQ1290 Laser Engraving machine

Features:

1. Laser Engraving Machine adopts the new high-efficiency laser tube, the laser beam is more stable than the traditional type,
and the life time of the laser tube can be over 10000 hours.
2. The mechanical structure is strong and stable, making the machine to run at high precision.
3. The electrical ability is stable, the engraving speed is high, and the precision is high.
4. Advanced DSP control system, professional motion control chip,consecutive high speed curve cutting
and the shortest path selection function improve the working efficiency a lot.

Specification:

Model
ZQ1290

Working area
1200mm*900mm

Laser power
80w

Laser type
CO2 Sealed laser tube , 10.6m, water-cooled

Cooling type
Water chiller

Engraving speed
0-60000mm/min

Cutting speed
0-50000mm/min

Total power
2KW/H

Laser output control
0-100% set by software

Min. engraving size
Chinese: 2.0mm*2.0mm English letter: 1.0mm*1.0mm

Highest scanning precision
4000DPI

Locating accuracy
+0.01mm

Controlling software
DSP control system

Graphic format supported
DST PLT BMP DXF DWG AI LAS,etc

Compatible software
CORELDRAW, PHOTOSHOP, AUTOCAD, TAJIMA, etc.

Color separation
Yes

Drive system
High-precision 3-phase stepper motor

Auxiliary equipments
Exhaust fan and air exhaust pipe, red-dot position system, focus lens & reflection mirrors.

Power supply
AC220V/60HZ

Working environment
Temperature:0-45, Humidity 5-95%(No condensate water)

Packing size
2.43m*1.72m*1.34m

Net weight
450KG

Applicable industry:
Mould industry (construction mould, aviation and navigation mould, wooden mould), advertising, decoration,
arts and crafts, electronics, electric appliances, etc.
Applicable Materials:
Materials such as acryl, wood planks(light planks, candle nut wood),bamboo ware, double color board, paper.

[Sell] Medical Mask Machine

Tue, 24 Apr 2012 00:04:00 +0530

Being realized through innovative expertise of their people we are offering a wide collection of Medical Mask Machine. Our products are made and developed from high quality materials. Our clients appreciate our ability to make available the most apt solutions as per their exacting business requirements.

More details please contact us.

[Sell] Cotton Swab Making Machine

Tue, 24 Apr 2012 00:01:00 +0530

Offering a wide range of Cotton Swab Making Machine that are highly acclaimed due to their high absorbent quality, softness and effective prices. Our clients can avail these from us at market leading prices. Our products are basically used for wound dressing and general cleaning in hospitals for taken care of patients.

More details please contact us.